ATN 4X12° S.W.A.T. RIFLESCOPE u s e r ` s g u i d e AMERICAN TECHNOLOGIES NETWORK CORP.
Iron Backup Sights for back-up emergency operation Reticle brightness adjustment ATN mounting system Battery housing ±5 Diopter Fixation screw of the locking mechanizm Elevation Windage Picatinny rail The information in this manual furnished for information use only, is subject to change without notice, is not to be construed as a commitment by ATN Corp. ATN Corp. assumes no responsibility or liability for any errors or inaccuracies that may appear in this book. ©2003 ATN Corp. All right reserved.
APPLICATION Intended for tactical LE and military marksmen the revolutionary ATN Super Wide Angle Tactical (SWAT) Scope is designed and made for professional firearms such as the AR15, M16 and M4. One of the most desired parameters for a tactical scope is the Apparent Field of View (Magnification X FOV in degrees) for fast target acquisition and tracking of moving targets. Taking the AFV concept further than Trijicon ACOG (3.5x7=24.5) and Elcan (3.
OPERATING MOUNTING NOTE: If the rail is not taken out easily, screw up tight one of screws into the threaded aperture in the middle of a fixing projection of the rail. Continue rotation of the screw. Thus the screw will push out a rail from a groove. 1. Slightly loosen the fixing screws on the weaver rail built into the scope. 2. Place the scope on the dovetail mount of the fire arm making certain that the mount aligns with the receptor attachment screw groove. Adjust as neces- FOCUSING sary.
WINDAGE AND ELEVATION The vertical and horizontal adjustments for the ATN 4X12° SWAT can be achieved by turning the elevation and windage adjustment mechanisms (remove dust caps first). Each click equals to 1/8 inches Elevation Remove the dust caps from the top of the windage and elevation adjusting handles. Turn the windage and elevation handles through the number of clicks necessary for an amendment. NOTE: Each click of adjustment changes bullet strike by the amount shown on the chart below.
ADDED SURVIVABILITY ATN 4X12° SWAT has a built-in visible flip-up Iron Backup Sights for back-up emergency operation. Upright the iron sights for shooting without optic of scope. The back-side sight has a horizontal and vertical adjustment. Iron Backup Sights for back-up emergency operation MAINTAINING YOUR RIFLE SCOPE Your rifle scope is waterproof and shockproof. However, you should never try to take apart or clean it internally (it will void your warranty).
WARRANTY LIMITATION OF LIABILITY ATN will not be liable for any claims, actions, suits, proceedings, costs, expenses, damages or liabilities arising out of the use of this product. Operation and use of the product are the sole responsibility of the Customer. ATN’s sole undertaking is limited to providing the products and services outlined herein in accordance with the terms and conditions of this Agreement.
For customer service and technical support, please contact American Technologies Network Corp. North American Office 20 S. Linden Ave. Suite 1B, South San Francisco, CA 94080 phone: 800-910-2862, 650-875-0130; fax: 650-875-0129 European Office phone: 44(0)870-0111286, fax: 44(0) 845-3349142 The following countries can use our toll free number 00 800 9102-8620 Austria, France, Germany, Holland, Italy, Spain, Sweden, Switzerland www.atncorp.