User's Manual

50 51
c) Select Monday, Tuesday, Wednesday, Thursday, Friday, Saturday, or
Sunday.
d) Tap the select date and set the selected attendance status’s start time.
e) Tap Confirm.
f) Repeat step 1 to 5 according to your actual needs.
NOTE
The attendance status will be valid within the configured schedule.
4. Tap
.
Result
When you authenticate on the initial page, the authentication will be marked
as the configured attendance status according to the configured schedule.
Example
If set the Break Out Schedule as Monday 11:00, and Break In Schedule as
Monday 12:00, the valid user’s authentication from Monday 11:00 to 12:00 will
be marked as break.
6.11.3. Set Manual Attendance via Device
Set the attendance mode as manual, and you can select a status manually
when you take attendance.
Before You Start
Add at least one user and set the user’s authentication mode. For details,
see User Management.
Steps
1. Tap T&A Status to enter the T&A Status page.
2. Set the Attendance Mode as Manual.
Figure 6-18. Manual Attendance Mode
3. Enable the Attendance Status function.
Result
You should select the attendance status manually after authentication.
NOTE
If you do not select a status, the authentication will be failed and it will
not be marked as a valid attendance.
6.11.4. Set Manual and Auto Attendance via Device
Set the attendance mode as Manual and Auto, and the system will automat-
ically change the attendance status according to the configured parameters.
At the same time you can manually change the attendance status after the au-
thentication.
Before You Start
Add at least one user and set the user’s authentication mode. For details,
see User Management.
Steps
1. Tap T&A Status to enter the T&A Status page.
2. Set the Attendance Mode as Manual and Auto.
Figure 6-19. Manual and Auto Mode
3. Select an attendance status and set its schedule.
a) Select Check In, Check Out, Break Out, Break In, Overtime In, or Over-
time Out as the attendance status.
b) Tap Schedule.
c) Select Monday, Tuesday, Wednesday, Thursday, Friday, Saturday, or
Sunday.
d) Tap the select date and set the selected attendance status’s start time.
e) Tap Confirm.
f) Repeat step 1 to 5 according to your actual needs.
NOTE
The attendance status will be valid within the configured schedule.
Tap
.
Result
On the initial page and authenticate. If you do not select a status, the authen-
tication will be marked as the configured attendance status according to the
schedule. If you tap Select Status and select a status to take attendance, the
authentication will be marked as the selected attendance status.
Example
If set the Break Out Schedule as Monday 11:00, and Break In Schedule as
Monday 12:00, the valid user’s authentication from Monday 11:00 to 12:00 will
be marked as break.