User's Manual

10 11
• Biometric recognition products are not 100% applicable to anti-spoofing
environments. If you require a higher security level, use multiple authen-
tication modes.
• Working temperature: 0°C to 50°C
• Indoor use. The device should be at least 2 meters away from the light,
and at least 3 meters away from the window.
CHAPTER 1. OVERVIEW
1.1. OVERVIEW
Face recognition terminal is a kind of access control device for face recog-
nition, which is mainly applied in security access control systems, such as lo-
gistic centers, airports, university campuses, alarm centrals, dwellings, etc.
1.2. FEATURES
• Supports Vanadium Oxide uncooled sensor to measure target’s tempera-
ture.
• Temperature measuring range: 30°C to 45°C (86°F to 113°F), accuracy:
0.1°C, deviation: ±0.5°C .
• Recognition distance: 0.3 to 1.8 m.
• Fast temperature measurement mode: Detects face and takes skin-sur-
face temperature without identity authentication.
• Multiple authentication modes are available: card and temperature, face
and temperature, card and face and temperature, etc.
• Face mask wearing alert, is an Option that can be enabled.
If the recognizing face does not wear a mask, the device will prompt a voice
reminder. At the same time, the authentication or attendance is valid.
• Forced mask wearing alert, is an Option that can be enabled.
If the recognizing face does not wear a mask, the device will prompt a voice
reminder. At the same time, the authentication or attendance will be failed.
• Triggers voice prompt when detecting abnormal temperature.
• Configurable door status (open/close) when detecting abnormal tempera-
ture.
• Transmits on-line and off-line temperature information to the client soft-
ware via TCP/IP communication and saves the data on the client soft-
ware.
• Face recognition duration <0.2 s/User; face recognition accuracy rate
≥99%.
• 6000 face capacity, 6000 card capacity, and 100,000 event capacity.
• Suggested height for face recognition: between 1.4 m and 1.9 m.
• Watchdog design and tamper function.
• Audio prompt for authentication result.
• NTP, manually time synchronization, and auto synchronization.
• Connects to external access controller or Wiegand card reader via Wie-
gand protocol.
• Connects to secure door control unit via RS-485 protocol to avoid the
door opening when the terminal is destroyed.
• Imports and export data to the device from the client software.
CHAPTER 2. APPEARANCE
Refer to the following contents for detailed information of the face recogni-
tion terminal:
Figure 2-1. Face Recognition Terminal Diagram