Specifications

Operation Manual
Lysar Industries
Page 5
4. SYSTEM FUNCTIONS
4.1. EQ-Link
The EQ-Link is the heart of your headset system that wirelessly connects the
EQ Reverse-Link and provides the interface for your radio and
communications system.
The EQ-Link will power on when your aircraft’s communication system
operates. Please note Pairing and other setting can be changed by plugging
EQ-Link into its supplied charger but the EQ-Link must be plugged in to a
powered intercom system in order for communications to operate properly.
4.2. EQ-Link Pairing
The EQ-Reverse Link and EQ-Link have been paired at the factory and no
other pairing procedure is required. If you wish to pair a new Reverse-Link and
EQ-Link please follow the instructions below:
To pair a EQ-R-Link to a new EQ-Link:
Connect your wired headset to the Reverse Link and Press the button on the
Reverse Link module. Power the EQ-Reverse-Link with your headset
connected.
Set EQ Reverse-Link to pairing mode from Advanced Voice Menu. (section
9.2)
Power the EQ-Link by aircraft connection or charging cable.
Ensure that the EQ-Link that you wish to pair to is set to Master.(see P13)
The EQ Reverse-Link should then detect the EQ-Link and announce the last 4
digits of the serial number of EQ-Link. This serial number can be found on the
back to the EQ-Link. If this is the correct unit as indicated in the headset then
press the button on the EQ R-Link to confirm and lock to this unit.
Your EQ Reverse-Link and headset is then paired to this EQ-Link and will only
link to this unit.