Specifications

Operation Manual
Page 8
Lysar Industries
Standard EQ Link Modes include:
Microphone noise cancelling DSP algorithms.
This mode will process the audio from the headset microphone and provide
additional filtering and processing to reduce noise induced into the headset
microphone and can be very useful for noisy aircraft situations.
Echo Cancelling
The EQ Wireless system provides digital audio communication between the
headset and the EQ Link, this technique will introduce delays in the audio
system and if further delays are present in the aircraft intercom system then
the result to the user can be delayed side tone or echo. If this is not acceptable
in your installation then ECHO Cancelling mode can be selected to reduce this
effect. When first turned ON the system will adapt and cancel the echo, this
can take a few seconds of conversation.
Intercom Mode
Intercom mode is typically used in systems such as hand held radio’s when no
system side tone is present. In this mode the microphone signal from the
headset is routed back to the headset from the EQ Link to provide side tone to
the headset user. This will also enable multiple headsets to operate on one EQ
Link and allow other headsets to hear all conversations of other headsets
linked to the Hand Held Radio.
Phone Mode
EQ Link phone mode will allow the MP3/Cell interface to remain active during
all voice activity and this port will NOT be muted during VHF reception.