Specifications

Operation Manual
Lysar Industries
Page 13
Voice guides will help navigate through the menu system, if unsure the system
will time out and return to normal operation after 5 seconds. If a mistake is
made it can be reprogrammed. If completely lost and unsure the FACTORY
RESTORE option will reset the EQ R-Link to an out of box state as delivered
from the factory. Pairing will need to be performed in this case when using EQ-
Link systems.
8.2. Noise Reduction ON/OFF
This setting will enable microphone noise reduction techniques on the
connected headset to ensure noise free communications from your headset
microphone.
8.3. Paring Mode ON/OFF
This setting will enable the EQ Reverse-Link to pair to a new EQ Link device,
once this is done for the EQ Link it should not have to be done again.
8.4. VOX Menu
This setting controls the activation of the headsets Microphone for VOX
operations a higher number means more effort is required to break the
microphone VOX and activate.
8.5. Volume Menu
This setting will make the received information louder or softer in your headset
and should be used along with your standard headset volume to set a nice
volume as required by your communications system.
8.6. Mic Level Menu
This will adjust your headsets microphone gain into your communications
system, use this if you need more or less microphone gain.
8.7. Mixture Menu
This adjusts the amount of side tone the user will hear when the system is
used with the EQ Link is in Echo Cancelling mode.
8.8. Factory Restore
Will return the EQ Reverse-Link to the original state as of out of the BOX.