Specifications

Operation Manual
Page 6 ATO Aviation Inc.
3.2. Volume Adjustment
The volume is adjusted by rotation of the knob, to increase rotate clockwise
and to decrease wind anti-clockwise, the volume level setting will be
announced with a voice prompt. The volume has been factory preset to a level
of 4.
Increase and decrease by rotating the knob one click at a time and
listen to the voice prompt to announce volume level setting.
3.3. Menu Mode
The Headset will then speak “MENU MODE”.
When this is performed the headset enters the Voice Menu System,
Note: if no more actions take place then the headset will exit the menu system
after 10 seconds.
Rotate the knob for:
“VOX SETTINGS, CONFIGURATION and ADVANCED” (please
refer to the flow chart on page XX for other menu setting instructions)
Press knob to confirm menu selection
When the EQ1 is in the VOX menu the knob can be rotated to select the value
and sensitivity of the VOX circuits, a higher number means a louder voice is
required to activate the VOX system.
“ONE, TWO, THREE……….…..TEN”
PRESS The KNOB 3 TIMES