Specifications

Operation Manual
ATO Aviation Inc Page 21
11. DEVICE SPECIFICATIONS
GENERAL
Frequency 2.4GHz ISM Band frequency hopping
RF Power 1mW, 0dBm
EQ-Link
DC Power 5-18volts DC for charging
Current 400mA Max
Input Audio Nominal 1000mVpp
Output Audio Nominal 150mVpp
HEADSET
DC Power Batteries AA, 2 units NiMh low loss
RF Power 1mW, 0dBm
Charge +5 volt only 400mA max
Operation Manual
Page 20 ATO Aviation Inc.
To enter pairing mode, the Headset must have first been set to EQ-Link mode.
The paring mode voice menu will then become available to enable pairing.
NOTE:
The VHF communications LEVEL is like MIC Gain on standard headsets and
can be programmed from the Pilot or EQ-Link Headset ONLY to the Base or
EQ-Link Controller, the Headset must be linked at this time to perform the
operation.