Owners Manual

ATOLL ELECTRONIQUE
OWNER’S MANUAL ~ INTEGRATED
IN300
ATOLL ELECTRONIQUEPage 3Page 6
Your appliance is equipped with a High-Res. asynchronous USB Input (B type). It will
be possible to use it only when you’ll have downloaded the appropriate driver on
your computer. This driver can be freely downloaded on our website at the page:
• Accepted format on optical and coaxial Inputs: 16-24 bits (32 kHz, 44,1 kHz,
48 kHz, 88,2 kHz, 96 kHz, 176,4 kHz and 192 kHz).
• Accepted format on USB input:
– DSD: DSD64 & DSD128.
– PCM : 16-24 bits (32 kHz, 44,1 kHz, 48 kHz, 88,2 kHz, 96 kHz,
176,4 kHz, 192 kHz, 352,8 kHz et 384 kHz).
To avoid any troubles in the transfer of High Resolution
files (24 bits/192 kHz), it is recommended to use a USB
interconnect with ferrite.
USB INPUT (16)
ACCEPTED FORMATS
http://www.atoll-electronique.com/en/products/dac-converters/dac-converter-dac200/
Efficacy power Wrms/ch./8 Ω (230v):
Efficacy power Wrms/ch./4 Ω (230v):
Power Supply:
Total of capacitors:
Input Impedance:
Sensitivity:
Signal/noise ratio:
Distortion at 1kHz:
Frequency Response:
Rising Time:
Dimensions:
Weight:
(technical data are subject to changes)
150 W
260 W
2×440 VA
86 400 µF
220 kΩ
540 mV
100 dB
0,05% / (10 W)
5 Hz - 100 kHz
2,0 µs
440×360×103mm
16,0 Kg
CAUTIONS
• Do not make any connections when your device is powered on.
• Put your device in a dry and well ventilated place, far from a source
of heat.
• Avoid any short-cut.
• Strictly respect polarity
+
& , as well as the left and right
• Do not plug-in two speakers in parallel on the same output.
ADVISES
• To optimize the performance of your device, you should switch it
on at least half an hour before any listening, the time for the power
stage to reach its ideal working temperature.
• Your device will give you optimal listening quality after this time-
lapse.
• Between two uses, it is, therefore, preferable to let the device in the
standby position so that it remains at its optimum temperature.
• At night or when you leave your home, it is best to use the main
switch to turn off the device.
• To optimize the sound quality of your system, we recommend that
you choose good-quality connection cords. Do not hesitate to ask
your specialist dealer for advice.
TECHNICAL DATA