OWNER’S MANUAL STREAMER MS120 E L E C T R O N I Q U E
OWNER’S MANUAL ~ STREAMER You have just bought a product with exceptional audiophile performances. We really thank you for your confidence in our products. To get the best part of your streamer, please read carefully this manual. INDEX 1 – General information..............................................................p3 2 – Connections.........................................................................p4 3 – ATOLL remote control............................................................
MS120 1 - GENERAL INFORMATION GENERAL INFORMATION AND ADVICES Your ATOLL Streamer is DLNA and UPnP compatible, it can run in a network with other devices. Take the time to read carefully the section “getting started” of this manual (page 7) before putting your unit under voltage. The display shows the selected radio station logo and has information about the files on the network and USB type sockets. It indicates the level of the volume from 0 to 100.
OWNER’S MANUAL ~ STREAMER 2 - CONNECTIONS 15 1 2 3 4 1) Analog audio output. 2) Analog inputs 1. 3) Analog inputs 2. 4) Optical digital output. 5) Coaxial digital output. 6) Optical digital input 1. 5 6 7 8 9 10 16 11 12 13 7) Optical digital input 2. 8) Coaxial digital input 1. 9) Trigger output (1). 10) Coaxial digital input 2. 11) Ethernet link input (RJ45). 12) USB type A input. 14 13) Power input. 14) ON/OFF switch. 15) WIFI connection antenna. 16) Bluetooth® antenna connection.
MS120 3 - ATOLL REMOTE CONTROL REMOTE CONTROL FONTIONS The remote control uses 2 lithium CR2032 (3V) batteries. Make sure to place + upside. Warning: some keys may have different uses depending on the menus or context. Keys already available from the front panel: 17) Menus control keys. 21) Volume control + & 22 . 23 22) Stand-by mode. 23) ALPHANUMERIC KEYS (from 0 to 9 and from A to Z). By quick press on key (2) i.e. select a, b, c, 2, A, B, C 24) HOME: allows to come back to the main menu.
OWNER’S MANUAL ~ STREAMER 4 - CONNECTING SETUP SOURCE MODE OR PREAMPLIFIER (BY-PASS) This device can be used as a source (like a CD player) or as a preamplifier which gives the ability to control the volume. The diagrams below show the wiring possibilities according to these different applications. MS120 Preamp Source Using the Streamer as a source directly linked to an integrated or a preamplifier. BY-PASS mode should be active and the BY-PASS led (a) switch on.
MS120 5 - PREAMP / BY-PASS FUNCTIONS VOLUME : The volume is managed using the buttons (21) on the front panel or the remote control. The volume level is displayed for a few seconds on the display, and it always remains indicated at the top of the display. On start-up, the volume is still the one that remained previously. Volume at zero corresponds to a complete “MUTE” of the device with switching of the output relay.
OWNER’S MANUAL ~ STREAMER Automatic : Connecting an RJ45 cable automatically launches the network link. This menu allows you to choose the network connection by prioritizing the wired connection, i.e. when the device is wired, the connection will automatically switch to wired. When no cable is connected, then the connection switches to WIFI. Wired: If you already plugged the network cable, the device will indicate that the appliance is connected The symbol indicates that the wired link is established.
MS120 FIRMWARE UPDATE: This menu allows toy yo make an update your appliance. Select “Check for update” some time to time. If there is no update, the display will show “No new updates”. If an update is available, the devices will automatically launch it. This may take several times so let the device run until it starts again.
OWNER’S MANUAL ~ STREAMER The IP address of your network drive is available in the “Settings / Network info” menu. It is also possible to rename your network drive by typing only the IP address of the latter in the search bar of your internet browser. This menu allows you to choose the quality of files in 24 bits/192 kHz or 24 bits/96 kHz. In case of limited internet speeds, favor 24 bits/96 kHz quality in order to preserve the bandwidth.
MS120 MEDIA SERVER This menu provides access to all the files present on the network. By selecting this menu, the list of different data sources appears (could be NAS, computer, router…). In each of them you can choose: Music / Photos / Videos. Only music files are supported by this device. Music: You can select music files depending on several criteria : (note that this is depending on the information placed on the original files).
OWNER’S MANUAL ~ STREAMER 7 - TROUBLESHOOTING TABLE Problem encountered Possible Solutions No sound. – Check your RCA connections. – Have you selected the correct source? – The volume might be at zero level. Impossible to access the Network. – Enter the WAP key again. – Make sure that the antenna is the supplied template (male connector) and that it is well screwed on its base. No recognition of the USB stick. – Check if the format is compatible. Frequent loss of the WIFI network.
