Owner's Manual

ATOLL ELECTRONIQUE
OWNER’S MANUAL ~ TUNER FM
TU80 Sig
ATOLL ELECTRONIQUEPage 5Page 4
1) Stereo output Left (L) and Right (R).
2) Aerial input 75 Ω.
3) General power plug.
4) ON/OFF switch.
5) Memory function (see details below).
6 & 7) Previous & next channel in
memory.
8) Display (see details below).
9) Mono or Stereo reception mode:
ON Stereo mode, light 5) appears.
10) Stereo reception Led.
11 & 12) Auto SCAN keys: with a
short press, you can scan the band by
0,5 MHz steps. A longer press starts the
auto SCAN. The SCAN will stop at every
station found.
13) ON/OFF button /Stand-by.
CONNECTING
DETAIL OF FUNCTIONS
1 2 3 4
5 6 7 8 9 10 11 12 13
A– Place yourself on a frequency to program.
B– Press MEM.
The number of channel twinkles:
C– Select the number of channel with keys CHAN or
+
. The number of
channels increments automatically.
D– Press MEM to confirm.
10) Stereo mode reception light. Activated by key MONO (9).
14) Number of the memorized channel.
15) Stations frequency (or channel name: when the RDS signal gives the
information, the display shows the name of the station after a few seconds).
Note: RDS signal can give only 8 characters.
The process of memorization is made with keys MEM, CHAN
&
+
of the front
panel or from the remote control. You can memorize 20 channels.
• Select the channel to cancel. Then hold the key MEM on the front panel. The
channel is canceled and “ERASED” appears on display.
• It is also possible to cancel all the memorized channels. From your device on
Stand-by mode, hold the key MEM on the front panel. ”MEM CLR” appears
on the display. All memories are canceled.
DISPLAY
MEMORIZATION OF CHANNELS
HOW TO CANCEL A MEMORIZED CHANNEL
14 15 10