Owner`s manual

Adaptable: Attaches to almost any BCD.
The SS1 can be used with virtually any manufacturers BCD by utilizing specially
designed adapters (patent pending) that allow the SS1 to work with a variety of hose
designs and sizes.
Convenient: Exclusive Quick Disconnect System.
Exclusive to Atomic Aquatics, the quick disconnect adapter system allows quick and
easy detachment of the SS1 from your BCD for transport and storage with your primary
regulator system or even switching to another BCD.
Designed for Comfort and Function.
The low profile elliptical shape lies flatter on your BCD than existing designs and is
more hydrodynamic. The control buttons are very large, ergonomically placed and
surfaced by a soft, tactile elastomer. The entire front cover is flexible and can be used
to purge the regulator.
SET-UP
CAUTION
These instructions are provided for the convenience of those
capable and familiar with set-up of this type of equipment. It is
strongly recommended that your professional retailer or scuba
repair technician do the final installation and check of the SS1.
WARNING!
Do not connect the inflator hose or any low-pressure hose to a
high-pressure (HP) port of the first stage. The hose could rupture
and could cause serious personal injury.
Do not assemble the high-pressure gauge to any of the low-pressure
(LP) ports or the gauge will not indicate tank pressure. Consult with
your dealer if you have any doubts about set up of this equipment.
10 11
SET-UP
SS1 owner's manual 7-05 7/26/05 5:21 PM Page 11