Product Info
GETTING STARTED
1
3
2
4
1
Download the Atomic Skiing app from the app store. Always have the latest
app version and firmware to ensure the Connected products function
optimally.
2
Charge the Movesense Modules (A). Attach both modules to the adapter (B)
and connect the USB cable to a power source.
When connected to adapter:
⊲
FLASHING RED: Not charging.
Modules either too hot or too cold or adapter faulty.
⊲
FLASHING YELLOW: Movesense Modules are charging
⊲
CONSTANT GREEN: Charging complete
3
Flip open the protective flap on the back of the power strap. Place
Movesense Module into designated holder on the power strap and attach
the Movesense connector to the matching connector on the strap. Attach the
protective flap after connecting. With the Demo version of the Connected
Strap, always ensure the Movesense Module is positioned on the center of
the rear of the cu. Failure to do this can result in inaccurate data collection.
When connected to power strap:
⊲
FLASHING GREEN: Connected to power strap, Movesense Module
running
⊲
FLASHING RED: Battery charge below 10%
⊲
FLASHING BLUE: Bluetooth connection established
⊲
FLASHING PURPLE: Module connection not working. Remove the module
connector and reconnect after 5 seconds.
⊲
NO LIGHT VISIBLE: Either Movesense Module has insucent charge and /
or there is inproper connection between the Movesense Module and the
Movesense connector.
4
Ensure the Bluetooth function of your phone is turned on and open the
Atomic Skiing app on your smartphone. Follow the directions for pairing
your boots in the app. Once the boots are properly paired you can begin to
use the Atomic Skiing app for tracking.
If multiple connected devices are in the immediate area, you will
be prompted to scan the QR code on the back of the Movesense Modules
with the Atomic Skiing app in order to pair your phone to the boots.
B
A
A
EN
76