Product Brochure Spectrum Master ™ High Performance Handheld Spectrum Analyzer MS2720T 9 kHz to 9 GHz, 13 GHz, 20 GHz, 32 GHz, 43 GHz Taking the World’s First 32 GHz and 43 GHz Handheld Spectrum Analyzers to the Next Level of Performance Now with Internal Atomic Clock Option! ►►Tracking Generators that cover 9, 13 and 20 GHz! ►►Internal Atomic Clock Option ►►Burst Detect™ included with every instrument ►►Preamplifiers up to 43 GHz included in every instrument ►►Dynamic Range greater than 106 dB ►►Touc
Spectrum Master™ MS2720T Spectrum Analyzer Introduction Overview Introduction Operating convenience is of paramount importance when equipment is used in the field. To achieve greater operating convenience several parameters are tied to related parameters. The input attenuation value by default is tied to the reference level, reducing the number of parameters a field technician may have to set.
Spectrum Master™ MS2720T Spectrum Analyzer Introduction Overview (continued) The Spectrum Master MS2720T features over 30 analyzers in one to meet virtually every measurement need.
Spectrum Master™ MS2720T Spectrum Analyzer Introduction Overview (continued) Interference Analysis Interference is an ever-growing concern for anyone who transmits a signal over the air. Spectrum Master is ideally suited for tracking down interference with its great lineup of interference measuring capability. Spectrogram shows you what is happening over time so spotting intermittent interferers becomes easy.
Spectrum Master™ MS2720T Spectrum Analyzer Introduction Overview (continued) Carrier to Interference (C/I) Measurement As more 802.11 access points are installed, there is an increasing level of interference in the 2.4 GHz and 5.8 GHz bands occupied by this service and other devices such as cordless telephones.
Spectrum Master™ MS2720T Spectrum Analyzer Features Power Meter High Accuracy Power Meter (Option 0019) Power Meter Modes The Spectrum Master offers an optional High Accuracy Power Meter (option 19) that uses external power sensors. USB Power Sensors Setting the transmitter output power of a base station properly is critical to the overall operation of a wireless network. A 1.5 dB change in power levels means a 15% change in coverage area.
Spectrum Master™ MS2720T Spectrum Analyzer Features Coverage Mapping (Option 0431) Coverage Mapping There is a growing demand for low cost coverage mapping solutions. Anritsu’s Coverage Mapping measurements option provides wireless service providers, public safety users, land mobile radio operators, and government officials with indoor and outdoor mapping capabilities.
Spectrum Master™ MS2720T Spectrum Analyzer Features AM/FM/PM Analyzer (Option 0509) AM/FM/PM Analyzer Spectrum Master comes with AM/FM/SSB audio demodulation as standard. By adding Option 509, the instrument becomes capable of measuring, analyzing, and displaying key modulation parameters of the RF Spectrum, Audio Spectrum, Audio Waveform and even includes a demodulation summary. • The RF Spectrum View displays the spectrum analyzer with carrier power, frequency, and occupied BW.
Spectrum Master™ MS2720T Spectrum Analyzer Features Introduction to Wireless Measurements Wireless Measurements The Spectrum Master features Wireless Measurements for the major wireless standards around the world.
Spectrum Master™ MS2720T Spectrum Analyzer Features GSM/GPRS/EDGE Measurements (Option 880) 3G and 4G Measurements A full suite of 3G and 4G measurement options is available for the MS2720T. You can equip your instrument with any combination of LTE (FDD and TDD), GSM, GPRS, EDGE, CDMA, 1x & EVDO, W-CDMA, TD-SCDMA, HSPA+ and WiMAX (Fixed and Mobile). GSM/GPRS/EDGE Analyzers The Spectrum Master features two GSM/GPRS/EDGE measurement modes.
Spectrum Master™ MS2720T Spectrum Analyzer Features W-CDMA/HSPA+ Measurements (Option 881) W-CDMA/HSPA+ Signal Analyzers The Spectrum Master features three W-CDMA/HSPA+ measurement situations: • RF Measurements • Demodulation • Over-the Air Measurements (OTA) RF Measurements – Spectral Emissions Mask The 3GPP spectral emission mask is displayed. Failing this test leads to interference with neighboring carriers, legal liability, and low signal quality.
Spectrum Master™ MS2720T Spectrum Analyzer Features TD-SCDMA/HSPA+ Measurements (Option 882) TD-SCDMA/HSPA+ Measurements The Spectrum Master features three TD-SCDMA/HSPA+ measurement modes: • RF Measurements • Demodulation • Over-the Air Measurements (OTA) RF Measurements – Spectral Emissions Mask The 3GPP spectral emission mask is displayed. Failing this test leads to interference with neighboring carriers, legal liability, and low signal quality.
Spectrum Master™ MS2720T Spectrum Analyzer Features LTE FDD/TDD Measurements (Option 883) LTE FDD/TDD Signal Measurements The Spectrum Master features three LTE measurement modes: • RF Measurements • Modulation Measurements • Over-the Air Measurements (OTA) Modulation Quality – Power vs. Resource Block A high utilization of the Resource Blocks would indicate a cell site in nearing overload and it may be appropriate to start planning for additional capacity.
Spectrum Master™ MS2720T Spectrum Analyzer Features CDMA/EV-DO Measurements (Option 884) CDMA Measurements The Spectrum Master features three CDMA measurement modes: • RF Measurements • Demodulation • Over-the Air Measurements (OTA) RF Measurements – Spectral Emissions Mask The 3GPP2 spectral emission mask is displayed. Failing this test leads to interference with neighboring carriers, legal liability, and low signal quality.
Spectrum Master™ MS2720T Spectrum Analyzer Features CDMA/EV-DO Measurements (Option 884) EV-DO Measurements The Spectrum Master features three EV-DO measurement modes: • RF Measurements • Demodulation • Over-the Air Measurements (OTA) RF Measurements – Pilot and MAC Power High values will create pilot pollution. High or low values will cause dead spots/dropped calls and cell loading imbalances/blocked calls. Demodulation – Frequency Error Calls will drop when mobiles travel at higher speed.
Spectrum Master™ MS2720T Spectrum Analyzer Features WiMAX Fixed/Mobile Measurements (Option 885) WiMAX Fixed/Mobile Measurements The Spectrum Master features two Fixed WiMAX and three Mobile WiMAX measurement modes: • RF Measurements • Demodulation (up to 10 MHz) • Over-the Air Measurements (OTA) (Mobile only) RF Measurement – Preamble Power High or low values will create larger areas of cell-tocell interference and create lower data rates near cell edges. Low values affect in-building coverage.
Spectrum Master™ MS2720T Spectrum Analyzer Features Master Software Tools (for your PC) Master Software Tools Master Software Tools (MST) is a powerful PC software post-processing tool designed to enhance the productivity of technicians in report generation, data analysis, and testing automation.
Spectrum Master™ MS2720T Spectrum Analyzer Features Menu Key Active Menu Speaker Fan Exhaust Port Power Indicator LED Battery Charge LED On/Off Key Fan Exhaust Port Arrow Keys Rotary Knob Shift & Esc Keys Keypad Battery Access Main Menu Keys Fan Inlet Handheld Size: 315 mm x 211 mm x 77 mm, (12.4 in x 8.3 in x 3.0 in) Lightweight: 3.7 kg to 4.4 kg (8.1 lb to 9.8 lb) depending on Frequency Option and Tracking Generator Ext Trigger In IF Out RF In N Type Connector for Options 709, 713 and 720.
Spectrum Master™ MS2720T Spectrum Analyzer Ordering Information Ordering Information — Options MS2720T Part Number Spectrum Master (requires option 709, 713, 720, 732 or 743) Description Frequency Options MS2720T-0709 Frequency Range 9 kHz to 9 GHz MS2720T-0713 Frequency Range 9 kHz to 13 GHz MS2720T-0720 Frequency Range 9 kHz to 20 GHz MS2720T-0732 Frequency Range 9 kHz to 32 GHz MS2720T-0743 Frequency Range 9 kHz to 43 GHz Tracking Generator Options MS2720T-0809 9 GHz Tracking Generator (requ
Spectrum Master™ MS2720T Spectrum Analyzer Ordering Information Power Sensors (For complete ordering information see the respective datasheets of each sensor) Part Number PSN50 Description High Accuracy Power Sensor, 50 MHz to 6 GHz, -30 to +20 dBm MA24105A True-RMS Inline Peak Power Sensor, 350 MHz to 4 GHz, 2 mW to 150 W MA24106A True-RMS USB Power Sensor, 50 MHz to 6 GHz, -40 dBm to +23 dBm MA24108A True-RMS USB Power Sensor, 10 MHz to 8 GHz, -40 dBm to +20 dBm MA24118A True-RMS USB Power Sensor
Spectrum Master™ MS2720T Spectrum Analyzer Ordering Information Optional Accessories GPS Antennas Part Number Description 2000-1528-R GPS Antenna, SMA(m) with 15 ft cable requires 5 VDC 2000-1652-R GPS Antenna, SMA(m) with 1 foot cable, requires 3.
Spectrum Master™ MS2720T Spectrum Analyzer Ordering Information Optional Accessories (continued) Bandpass Filters Part Number Description 1030-114-R 806 MHz to 869 MHz, N(m) to SMA(f), 50 Ω 1030-109-R 824 MHz to 849 MHz, N(m) to SMA(f), 50 Ω 1030-110-R 880 MHz to 915 MHz, N(m) to SMA(f), 50 Ω 1030-105-R 890 MHz to 915 MHz Band, 0.
Spectrum Master™ MS2720T Spectrum Analyzer Ordering Information Optional Accessories (continued) Attenuators Part Number 3-1010-122 42N50-20 Description 20 dB, 5 W, DC to 12.4 GHz, N(m) to N(f) 20 dB, 5 W, DC to 18 GHz, N(m) to N(f) 42N50A-30 30 dB, 50 W, DC to 18 GHz, N(m) to N(f) 3-1010-123 30 dB, 50 W, DC to 8.5 GHz, N(m) to N(f) 1010-127-R 30 dB, 150 W, DC to 3 GHz, N(m) to N(f) 3-1010-124 40 dB, 100 W, DC to 8.
• United States Anritsu Company • Italy Anritsu S.r.l. 1155 East Collins Boulevard, Suite 100, Richardson, TX, 75081 U.S.A. Toll Free: 1-800-ANRITSU (267-4878) Phone: +1-972-644-1777 Fax: +1-972-671-1877 Via Elio Vittorini 129 00144 Roma Italy Phone: +39-06-509-9711 Fax: +39-06-502-2425 • Canada Anritsu Electronics Ltd.
