CLR SERIES OWNERS MANUAL ACLR-AC ACLR-AW ACLR-PC ACLR-PW ACTIVE CAB ACTIVE WEDGE PASSIVE CAB PASSIVE WEDGE THE WORLD’S FIRST AND LEADING COMPANY DESIGNING AMPLIFICATION AND MONITORING SOLUTIONS FOR AMP MODELERS / PROFILERS www.atomicamps.
WARNING! TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. The Atomic CLR is designed for use as a floor wedge or pole-mounted PA speaker in portable sound reinforcement applications. It is not intended for overhead suspension. Use in that manner is unauthorized and may cause injury or death. NO USER SERVICABLE PARTS INSIDE, REFER SERVICING TO QUALIFIED PERSONNEL ONLY. SERVICE BY PERSONS OTHER THAN ATOMIC AUTHORIZED SERVICE TECHNICIANS MAY VOID WARRANTY.
REACTOR SERIES USER MANUAL T a b le o f contents 2 The CLR Series 3 Summary of Components 4 Panel Diagrams 5 - 6 Features & Instructions 7 Specifications 8 Warranty 1
 T h e atomic C L R S E R I E S THE CLR SERIES is a range of professional, reference quality loudspeakers from, Atomic Amplifiers, the world’s first and leading company designing amplification and monitoring solutions for amp modelers / profilers. The current offering includes both CAB and WEDGE formats that come in active and passive versions.
SYSTEM DESCRIPTION The Atomic CLR is a two-way coincident loudspeaker consisting of a heavy-duty, horn-loaded 12” cone transducer for low frequencies and a high-output, 1”-exit compression driver with a 1.75” voice coil driving a constant-directivity type horn for high frequencies. The enclosure is constructed of 12-ply, void-free plywood throughout, with internal structural details that serve both to form the lowfrequency horn shape and to add substantial structural rigidity.
A cti v e C a b and W ed g e C ontrol Panel 1 Heat Sink 2 Input 1 Level 3 9 4 Input 2 Level 11 10 8 Input 2 Input 1 Clip LED 5 13 12 Preset Switch 6 Speaker Limit Indicator Link Select 14 Link Master Level 7 Power Switch Sub 15 IEC Power Inlet Input 2 Clip LED Input 1 P A S S I V E C a b and W ed g e C ontrol Panel 1 Input 2 Thru 4
Active Cab and Wedge Panel Explanations  1 Heat Sink – Allows the CLR Series to be fanless and “studio quiet”. It 1. keeps amp modules and power supply cool by drawing heat from them and dissipating it into the open air. Please note: The heat sink will get warm to the touch while the amp is powered “on” even when the amp is at idle. This is normal and is well within regulated operating guidelines. 2 2. Input 1 Level – Adjusts the input signal level to the amplifier. 3 4.
PASSIVE Cab and Wedge Panel Explanations  1 Input – ¼” / Speakon Combo input jack for the speaker system. 1. 2 2. Thru – ¼” / Speakon Combo pass though to send signal to another system. Gain Structure Setup for Active Speakers Optimizing gain structure is an important step in minimizing noise and preventing signal overload (clipping). There are three level controls on the panel of active CLR speakers.
S peci f ication Frequency Response Active: 70Hz-18kHz, +/- 2.5 dB Passive: 70Hz-18kHz, +/- 2.
Response Data  On Axis Amplitude Response Freefield response with test mic at 2 meters Normalized Off Axis Responses Off axis responses taken at 10-degree intervals normalized to on-axis response 8
WARRANTY Atomic Amplifiers warrants to the original purchaser that this product will be free of defects in material and workmanship for a period of 1 year from the original date of purchase. It is understood that Atomic Amplifiers reserves the rights to inspect any warranty part prior replacing or repairing them to insure that their defect is not a result of user error. These warranties are subject to the conditions, exclusions, and limitations hereinafter set forth.
Atomic Amplifiers LLC 469 Derby Milford Road, Orange, CT 06477 (646) 201-9543 [tel] info@atomicamps.com www.atomicamps.com www.atomicamps.
