We strive to ensure that our products are of the highest quality and free of manufacturing defects or missing parts. However, if you have any problems with your new product, DO NOT RETURN IT TO THE STORE, please contact us toll free @: 1-888-996-2729 FAX: 1-866-873-3531 gameroom@escaladesports.com Or write to: Escalade Sports Customer Service Department P.O. Box 889 Evansville,IN 47706 Please have your date code when inquiring about parts.
IMPORTANT! READ EACH STEP IN THIS MANUAL BEFORE YOU BEGIN THE ASSEMBLY. TWO ADULTS ARE REQUIRED TO ASSEMBLE THIS ATOMIC PROFORCE SOCCER TABLE Tools Required: T1 - Allen Wrench (Included) Phillips Screwdriver Furniture Polish and Cloth Assembly Tips Make sure you understand the following tips before you begin to assemble your soccer table. 1. Start all bolts by hand before tightening. 2. Some drawings or images in this manual may not look exactly like your product.
HARDWARE IDENTIFIER ( To Scale) H1 - 6mm x 22mm Allen Head Bolt (16 pcs) H2 - 6mm x 19mm Flat Washer (16 pcs) H3 - 3mm x 28mm Phillips Flat Head Screw (8 pcs) H4 - 4mm x 12mm Phillips Round Head Screw (84 pcs) H5 - 3mm x 28mm Phillips Washer Head Screw (18 pcs) H6 - 4mm x 12mm Phillips Flat Head Screw (6 pcs) (Not to Scale) H7 - 4mm x 51mm Phillips Flat Head Screw (12 pcs) T1 - Allen Wrench (1 pc) H8 - 4mm x 51mm Zinc - Phillips Flat Head Screw (4 pcs) ACCESSORIES IDENTIFIER ( Not to Scale) A1-
PARTS IDENTIFIER ( Not to Scale) P3 - Leg (4 pcs) P4 - Playfield (1 pc) P6 - Goal End Board (2 pcs) P7 - Playfield Support Brace (2 pcs) P8 - Top Goal Box (2 pcs) P9 - Bottom Goal Box (2 pcs) P10 - Scorer (2 pcs) P11 - Leg Leveler (4 pcs) P12 - Playfield Trim (2 pcs) P13 - Plastic Rod Washer (16 pcs) P14 - Rod Bumper (16 pcs) P15 - Rod End Cap (8 pcs) P16 - Rod Handle (8 pcs) P1 - Side Apron (2 pcs) P2 - End Apron (2 pcs) P5 - End Top Rail (2 pcs) ! P17 - Outside Ball Entry Cup (2 pcs) All
ROD IDENTIFIER ( Not to Scale) R1 - 2 Player Rod Assembly Black (1 pc) R4 - 2 Player Rod Assembly Ivory (1 pc) R2 - 3 Player Rod Assembly Black (2 pcs) R5 - 3 Player Rod Assembly Ivory (2 pcs) R3 - 5 Player Rod Assembly Black (1 pc) R6 - 5 Player Rod Assembly Ivory (1 pc) ! All Rights Reserved. © 2016 Escalade Sports WARNING: CHOKING HAZARD Small parts. Not for children under 3 yrs.
PARTS REQUIRED: 1 pc - P1 Side Apron 16 pcs - P13 Plastic Rod Washer 16 pcs - P14 Rod Bumper 1 pc - R1 2 Player Rod Assembly Black 2 pcs - R2 3 Player Rod Assembly Black 1 pc - R3 5 Player Rod Assembly Black 1 pc - R4 2 Player Rod Assembly Ivory 2 pcs - R5 3 Player Rod Assembly Ivory 1 pc - R6 5 Player Rod Assembly Ivory STEP 1: Find a clean, level place to begin the assembly of your soccer table. We recommend building the table on the box top to protect the parts during assembly.
PARTS REQUIRED: 1 pc - P1 Side Apron STEP 2: Once your are sure you have the rods set correctly, slide the other P1 Side Apron on the rods as shown in FIGURE 2.
PARTS REQUIRED: 8 pcs - H3 Phillips Flat Head Screw STEP 4: Attach P5/P6 assemblies from STEP 3 to P1 Side Apron using pre-drilled pilot holes with H3 Screws as shown in FIGURE 4. Tighten, but do not strip out H3 Screws. IMPORTANT NOTE: The holes are pre-drilled at an ANGLE on purpose, be sure to allow H3 Screws to follow pre-drilled holes. P5/P6 Assembly P1 H3 IMPORTANT NOTE: Be sure to keep this assembly square during P5/P6 assembly.
PARTS REQUIRED: 2 pcs - P12 Playfield Trim STEP 6: Carefully peel the protective film strips off of the 3 pieces of adhesive tape on the underside of both P12 Playfield Trims. Turn them over and carefully place them along P1 Side Aprons as shown in DETAIL B and FIGURE 6. FIGURE 6 P12 P12 P1 Peel and Turn Over DETAIL B NOTE: Adhesive strip this side.
PARTS REQUIRED: 20 pcs - H4 Phillips Round Head Screw 2 pcs - P2 End Apron 2 pcs - P8 Top Goal Box 2 pcs - P9 Bottom Goal Box STEP 8: Attach P18 Plastic Brackets onto the back side of P2 End Apron using pre-drilled pilot holes with H4 Screws as shown in FIGURE 8. Tighten, but do not strip out H4 screws. NOTE: Be sure bottom edge of P18 Plastic Brackets is flush with bottom edge of apron.
PARTS REQUIRED: 12 pcs - H4 Phillips Round Head Screw 2 pcs - P7 Playfield Support Brace 6 pcs - P18 Plastic Bracket P18 P7 H4 STEP 10: Attach P18 Plastic Brackets onto P7 Playfield Support Braces using pre-drilled pilot holes with H4 Screws as shown in FIGURE 10. Tighten, but do not strip out H4 screws. H4 P18 NOTE: Be sure bottom edge of all P18 Plastic Brackets are flush with the edge of P7 Support Braces.
PARTS REQUIRED: 16 pcs - H1 Allen Head Bolt 16 pcs - H2 Flat Washer 4 pcs - P3 Leg 4 pcs - P11 Leg Leveler 1 pc - T1 Allen Wrench STEP 12: Attach P3 Legs using H1 Allen Head Bolts with H2 Flat Washers as shown in FIGURE 12. Use T1 Allen Wrench to tighten all bolts. Thread P11 Leg Levelers to each P3 Leg as shown in FIGURE 12. P11 FIGURE 12 P3 H2 H2 H1 H1 H1 All Rights Reserved.
THIS STEP REQUIRES FOUR OR MORE ADULTS. VERY CAREFULLY TURN THE TABLE OVER AND SET IT ON ITS LEGS. BE CAREFUL. THE TABLE IS VERY HEAVY. PARTS REQUIRED: 6 pcs - H6 Phillips Flat Head Screw 4 pcs - H8 Zinc-Phillips Flat Head Screw 2 pcs - P10 Scorer 8 pcs - P15 Rod End Cap 8 pcs - P16 Rod Handle 2 pcs - P17 Ball Entry Cup STEP 13: Attach P10 Scorers onto the top of P5 End Top Rails using H8 Screws as shown in FIGURE 13. Tighten, but do not strip out H8 screws.
Congratulations! You have now assembled your soccer table. Please note the Care and Use instructions below to insure many years of trouble free use of your soccer table. CARE AND USE OF YOUR ATOMIC PROFORCE SOCCER TABLE 1. Apply spray furniture polish to a clean cloth and wipe down the rods to make them slide easier in the rod bushings. 2. Use spray furniture polish to clean all exterior surfaces of your soccer table. 3. Use a carpenters level to properly level table using the leg levelers. 4.
90 DAY LIMITED WARRANTY This consumer warranty extends to the original consumer purchase of any ESCALADESPORTS Product (hereinafter referred as the "Product"). WARRANTY DURATION: This Product is warranted to the original consumer purchase of a period of 90 days from the original purchase.
Nosotros tratamos de asegurarnos que nuestros productos sean de la más alta calidad y libre de problemas, como defectos de fabricación ó partes incompletas. Sin embargo, Si usted tiene algún problema con su producto, por favor NO LO REGRESE A LA TIENDA pongase en contacto con nosotros llamando gratis al: 1-888 -996-2729 FAX : 1-866-873-3531 gameroom@escaladesports.com O escriba a: EscaladeSports Departamento de Atención al Cliente P.O.
IMPORTANTE! LEA TODOS LOS PASOS DE ESTE MANUAL ANTES DE COMENZAR A ARMAR. IMPORTANTE! LOS DIBUJOS DE ESTE MANUAL PUEDEN HABERSE EXAGERADO O MODIFICADO PARA MOSTRAR LOS DETALLES. SE REQUIEREN DOS ADULTOS PARA ENSAMBLAR ESTA MESA “ATOMIC PROFORCE”. Herramientas Necesarias: T1 - Llave Allen (Incluida) Desarmador Phillips Abrillantador para muebles y un paño Un desarmador eléctrico, puede resultarle muy útil para armar la mesa.
IDENTIFICADOR DE TORNILLOS ( A Escala) H1 - 6mm x 22mm Tornillo Allen (16 pzas.) H4 - 4mm x 12mm Tornillo Phillips (Cabeza redonda) (84 pzas.) H2 - 6mm x 19mm Rondana (16 pzas.) H3 - 3mm x 28mm Tornillo Phillips (cabeza plana) (8 pzas.) H5 - 3mm x 28mm Tornillo Phillips (cabeza tipo arandela) (18 pzas.) H6 - 4mm x 12mm Tornillo Phillips (cabeza plana) (6 pzas.) (No a Escala) H7 - 4mm x 51mm Tornillo Phillips (cabeza plana) (12 pzas.) H8 - 4mm x 51mm Zinc - Tornillo Phillips (cabeza plana) (4 pzas.
IDENTIFICADOR DE LAS PARTES ( No a Escala) P1 - Panel Lateral (2 pzas.) P2 - Panel del Extremo (2 pzas.) P3 - Pata (4 pzas.) P7 - Soporte de la Superficie de Juego (2 pzas.) P5 - Riel Superior (2 pzas.) P6 - Tabla del Extremo (2 pzas.) P9 - Porteria (Parte Inferior) (2 pzas.) P10 - Marcador (2 pzas.) P11 - Nivelador de las patas (4 pzas.) P14 - Tope de la barra (16 pzas.) P15 - Tapón para la barra (8 pzas.) P13 - Rondana de Plástico (16 pzas.) P17 - Entrada de pelotas (2 pzas.
IDENTIFICADOR DE LAS BARRAS ( No a Escala) R1 - Barra con 2 jugadores Negros (1 pza.) R4 - Barra con 2 jugadores color Marfil (1 pza.) R2 - Barra con 3 jugadores Negros (2 pzas.) R5 - Barra con 3 jugadores color Marfil (2 pzas.) R3 - Barra con 5 jugadores Negros (1 pza.) R6 - Barra con 5 jugadores color Marfil (1 pza.) ! Todos los derechos reservados. © 2016 Escalade Sports ADVERTENCIA: PELIGRO DE ASFIXIA Piezas pequeñas. No adecuadas para niños menores de 3 años.
PARTES REQUERIDAS: 1 pza. - P1 Panel Lateral 1 pza. - R1 Barra con 2 jugadores (Negros) 16 pzas. - P13 Rondana de Plástico 16 pzas. - P14 Tope de la barra 2 pzas. - R2 Barra con 3 jugadores (Negros) 1 pza. - R3 Barra con 5 jugadores (Negros) 1 pza. - R4 Barra con 2 jugadores (Marfil) 2 pzas. - R5 Barra con 3 jugadores (Marfil) 1 pza. - R6 Barra con 5 jugadores (Marfil) PASO 1: Elija una superficie plana, nivelada y limpia para empezar a ensamblar su mesa de fútbol.
PARTES REQUERIDAS: 1 pza. - P1 Panel Lateral PASO 2: Una vez que se asegure de que las barras estén colocadas correctamente, deslice el otro Panel Lateral P1 en las barras como se muestra en la FIGURA 2. FIGURA 2 P1 R5 R4 R2 R6 R4, R5 y R6 El orificio/Mango va en el otro extremo de estas barras R3 R5 R1 R2 C1 Buje de la barra Nota: C1 Buje de la barras R1, R2 y R3 Orificio/Extremo del Mango ya están instalados en cada P1 Panel Lateral PARTES REQUERIDAS: 16 pzas.
PARTES REQUERIDAS: 8 pzas. - H3 Tornillo Phillips (cabeza plana) PASO 4: Coloque los paneles P5/P6 ensamblados anteriormente en el PASO 3 al Panel Lateral P1 utilizando los orificios guía pre-perforados con los Tornillos H3 como se muestra en la FIGURA 4. Apriete, pero no sobre apriete los Tornillos H3. NOTA IMPORTANTE: Los orificios están pre-perforados en ANGULO al propósito, permita y asegúrese de que los tornillos H3 se inserten siguiendo los orificios pre-perforados.
PARTES REQUERIDAS: 2 pzas. - P12 Borde de Superficie de juego PASO 6: Despegue con cuidado las tiras protectoras de las 3 piezas de cinta adhesiva de la parte inferior de ambas piezas P12. Voltéelos y cuidadosamente colocarlos a lo largo de Paneles Laterales P1 como se muestra en el DETALLE B y FIGURA 6. FIGURA 6 P12 P12 P1 Despegue y Voltear DETALLE B NOTA: tira adhesiva de este lado. PARTES REQUERIDAS: 18 pzas. - H5 Tornillo Phillips (cabeza tipo arandela) P4 1 pza.
PARTES REQUERIDAS: 20 pzas. - H4 Tornillo Phillips (Cabeza redonda) 2 pzas. - P8 Porteria (Parte Superior) 4 pzas. - P18 Soporte de Plástico 2 pzas. - P2 Panel del Extremo 2 pzas. - P9 Porteria (Parte Inferior) PASO 8: H4 H4 Coloque los Soportes de Plástico P18 en la parte de FIGURA 8 atrás del Panel del Extremo P2 usando los orificios guía ya pre-perforados con tornillos H4 como se muestra en la FIGURA 8. Apriete los tornillos, pero no los sobre apriete ya que se dañarían.
PARTES REQUERIDAS: 12 pzas. - H4 Tornillo Phillips (Cabeza redonda) P18 2 pzas. - P7 Soporte de la Superficie de Juego P7 6 pzas. - P18 Soporte de Plástico H4 PASO 10: Coloque Soporte de Plástico P18 en los Soportes de la Superficie de Juego P7 usando los orificios guía ya pre-perforados con tornillos H4 como se muestra en la FIGURA 10. Apriete los tornillos, pero no los sobre apriete ya que se dañarían.
PARTES REQUERIDAS: 16 pzas. - H1 Tornillo Allen 4 pzas. - P3 Pata 1 pza. - T1 Llave Allen 16 pzas. - H2 Rondana 4 pzas. - P11 Nivelador de las patas PASO 12: Coloque Patas P3 usando los Tornillo Allen H1 y Rondanas H2 como se muestra en la FIGURA 12. Use la Llave Allen T1 para apretar todos los tornillos. Coloque cada Nivelador P11 a cada P3 Pata como se muestra en la FIGURA 12. P11 FIGURA 12 P3 H2 H2 H1 H1 H1 Todos los derechos reservados.
ADVERTENCIA ESTE PASO REQUIERE DE DOS O MAS ADULTOS. CON MUCHO CUIDADO VOLTEE LA MESA HASTA QUE LAS PATAS DE LA MESA ESTÉN SOBRE EL PISO. TENGA CUIDADO LA MESA ESTÁ MUY PESADA. PARTES REQUERIDAS: 6 pzas. - H6 Tornillo Phillips (cabeza plana) 2 pzas. - P10 Marcador 8 pzas. - P16 Mango de la barra 4 pzas. - H8 Zinc-Tornillo Phillips (cabeza plana) 8 pzas. - P15 Tapón para la barra 2 pzas.
Felicidades! Ahora ya ha terminado de ensamblar su mesa. Por favor, Siga las instrucciones del uso y el cuidado de su mesa abajo mencionadas, para garantizar muchos años sin problemas el juego de su mesa. CUIDADO Y USO DE SU MESA 1. Use spray abrillantador de muebles con un trapo limpio para limpiar las barras y se deslicen mas fácil en los bujes de las barras. 2. Use spray abrillantador de muebles para limpiar todas las superficies exteriores de su mesa. 3. 4. 5. 6. 7.
Todos los derechos reservados.