User Manual

2016 Escalade Sports

For Customer Service Call 1-888-996-2729

PARTS REQUIRED:

6 pcs - H6 Phillips Flat Head Screw 2 pcs - P10 Scorer 8 pcs - P16 Rod Handle

4 pcs - H8 Zinc-Phillips Flat Head Screw 8 pcs - P15 Rod End Cap 2 pcs - P17 Ball Entry Cup

STEP 13:

Attach P10 Scorers onto the top of P5 End Top Rails using H8 Screws as shown in FIGURE 13.

Tighten, but do not strip out H8 screws.

Attach P15 Rod End Caps to the rod as shown in FIGURE 13.

Slide P16 Rod Handle onto each rod end with the small hole shown in FIGURE 13.

IMPORTANT NOTE: A small amount of liquid soap applied inside each P16 Rod Handle will allow them to

slip onto rod easier.

Attach P17 Ball Entry Cups onto P1 Side Aprons using H6 Screws as shown in FIGURE 13.

Tighten, but do not strip out H6 screws.

FIGURE 13

P10

P15

P16

P17

THIS STEP REQUIRES FOUR OR MORE ADULTS.

VERY CAREFULLY TURN THE TABLE OVER AND SET IT ON

ITS LEGS. BE CAREFUL. THE TABLE IS VERY HEAVY.

Note:

Small

Hole