User Manual

2016 Escalade Sports

For Customer Service Call 1-888-996-2729

STEP 6:

Carefully peel the protective film strips off of the 3 pieces of adhesive tape on the underside of both P12 Playfield

Trims. Turn them over and carefully place them along P1 Side Aprons as shown in DETAIL B and FIGURE 6.

PARTS REQUIRED:

2 pcs - P12 Playfield Trim

FIGURE 6

DETAIL B

Peel and Turn Over

STEP 7:

Place P4 Playfield with graphics

facing down onto the main cabinet.

Align P4 Playfield holes with P12

Playfield Trims holes and attach

using H5 Screws as shown in

FIGURE 7.

Tighten, but

do not strip out H5

Screws.

PARTS REQUIRED:

18 pcs - H5 Phillips Washer

Head Screw

1 pc - P4 Playfield

P12

FIGURE 7

Graphic

facing down

IMPORTANT NOTE:

P4 Playfield must be evenly

spaced on top of both ends

of P6 Goal End Board - at each

end of cabinet assembly.

P1 Side Aprons may be slightly

warped. Please keep P1 Side

Aprons pushed in tight against

the P4 Playfield for correct assembly.

All screws must be screwed

STRAIGHT down.

NOTE: Adhesive

strip this side.