Instruction Manual
Table Of Contents
©
2012 Escalad e Sports
Fo r Custome r Servic e Cal l 1-888-996-2729
7
All Rights Reserved.
STEP 5:
Attach Leg P6 using Allen Head Bolts H6 with Flat Washer H7 as shown in Figure 5. Next, Thread Leg
Levelers P9 to bottom of Leg P6 as shown in Figure 5.
Do not tighten Bolts H6 at this time.
PARTS REQUIRED:
12 pcs - H6 Allen Head Bolt 4 pcs - P9 Leg Leveler
12 pcs - H7 Flat Washer 1 pc - T1 Allen
4 pcs - P6 Leg Wrench
Figur e 5
STEP 6:
Attach Leg Panel P7 to each side of Leg P6 as shown in Figure 6 using Phillips Washer Head Screws H1.
Use the pilot hole provided. Tighten All Hardware this time.
PARTS REQUIRED:
24 pcs - H1 Phillips Washer 4 pcs - P7 Leg Panel
Head Screw
H1
H1
H1
H1
H1
H1
Figur e 6
H6
H7
H6
H7
T1
P7
H1
H1
H1
H1
H1
H1
P7
P9
P6
NOTE:
Use pilot holes in Legs
to attach Leg Panels.
Tighten Bolts H6
after Leg Panel P7
assembly.