User's Guide

VirtualDJ‘s standard interface provides access to two virtual ―decks‖. To load a track to a deck,

drag and drop files into each of the decks spinning virtual platters.

The two decks are equipped with the following controls and displays:

1. Information about track currently loaded – provides key information about the

currently loaded track. Artist, Title, Elapse Time, Remaining Time, Gain level, Key of

Track, Current Pitch position.

2. Hot Cues - Use the three (3) buttons to set cue points. The first time that a left-click on

one of these buttons, a cue point will be set. At any time left-clicking on the

corresponding button and the track jumps back to that cue point. To set a new cue point

for the hot cue, right-click the corresponding hot cue button. If wanting to delete a cue

point, right-click on its icon in the waveform display, and select ―delete‖. Lock image

shows that the Smart Cue feature is activated. When smart_cue is activated, songs are

automatically re-synchronized when jumped to a new position or cue.

3. BPM – Current BPM of the track based on Pitch changes. BPM button for manually

‗tapping-out‘ the beats per minute of a song, you can left-click to the beat on the BPM

button of the appropriate deck playing your track. Right click the button to access the

‗Edit BPM and Automix‖ dialog

DECK CONTROLS