User's Guide

Disengage Beatlock – Once engaged, the Beatlock feature will keep the deck locked to the beat on

the other deck, no matter if you are scratching or changing the pitch on the other deck. Disengage ―on

load‖ or ―on switch‖ will automatically disengage the beatlock feature when the deck is loaded/switched.

Smart BeatTap – When enabled and using the beat_tap action, it will automatically "snap" to the

nearest plausible BPM and phase. This allows for very accurate BPM by just tapping 3 or 4 beats, the

first tap will set the phase only, snapping to the nearest beat (you can tap only once to change the

phase or the 4:4 strong beat, for example). One tap will not change the bpm. Subsequent taps will not

change the phase, but change the bpm to the nearest plausible bpm value.

Allow BPM <80 – Allows adjustment to the BPM Engine‘s value range. Disabled the range is set

between 80 and 240. A setting of Smart sets the range for values between 60 and 240.

Auto-Cross Length – Use this slider to specify the duration of the fade during automatic mixing. If this

is set to 0 (left side), the tracks will play from start to finish.

AutoLoad Playlists – See page 15 – ―Playlist Setup‖

AutoSave Unplayed – See page 19 – ―AutoSave Unplayed‖

OPTIONS