User Guide

26
VirtualDJ features an internal mixer section as part of the Mixer panel.
It can be used just like a regular DJ mixer.
The controls on the mixer include:
1. Panel selection buttons
2. Master and Headphone Cue volume
knobs
3. Channel Gain
This knob sets the gain level for the
corresponding channel (deck). (Right
clicking will bring it to the value that
matches the other deck level. Double
clicking brings it back to 0)
Key Adjust
Adjust the key of the playing track
without adjusting its pitch/tempo.
4. EQ
These knobs allow you to adjust the low,
mid, and high frequencies of the audio
playing on the desired channel of the
mixer. Each frequency range can also be
cut by right-clicking on the respective
knob.
5. Channel Faders
These vertical faders allow you to adjust the audio signal of the desired channel.
6. PFL and VU Meters
Sends the pre-fader level of the audio to the cue section for headphone monitoring.
VU Meters show the current output of the respective deck.
7. Crossfader
The crossfader blends audio or video between the two decks. By sliding this fader from channel
to channel you can isolate the left and right deck or blend them together.
INTERNAL MIXER CONTROLS