Operation Manual

37
AutoLoad Playlists – See page 18 – “Playlist Setup”
AutoSave Unplayed – See page 21 – “AutoSave Unplayed”
Auto Pitch Matching – When loading a song, automatically adjusts the pitch so that the BPM
matches the BPM of the song currently playing.
Auto Gain – This is the auto gain adjustment setting for VirtualDJ. The values are :
Disabled – Use the raw db level of the track as it was recorded, ripped, or normalized
Auto – normalize the track to a 0db level for play
Auto+Remember – normalize the track to a 0db level for play if loaded for first time, then
remember the last db gain adjust for next loading of the track.
Remember – loads the track the first time using the Disabled setting, then remember
the last db gain adjust for next loading of the track
Pitch Reset on Load – If you enable this option, the pitch slider will be reset to 0% every time
you load a track.
EQ Reset on Load – If enabled, this option will reset the equalizer on the deck when you load
a new track onto it.
Auto Cue – If enabled, will advance track position to the first cue point if one exists (or with the
first beat of the song if no cue exists and if “always” is selected) when loading a track.
Auto Headphones – This option allows for automatic switching of headphone cues. If you
select “on load”, the headphone cue will switch the headphone cue when you load a new track.
If you select “always” the headphone cue will switch when you load a new track or scratch a
track that is already playing.
Disengage Beatlock – Once engaged, the Beatlock feature will keep the deck locked to the
beat on the other deck, no matter if you are scratching or changing the pitch on the other deck.
Disengage “on load” or “on switch” will automatically disengage the beatlock feature when the
deck is loaded/switched.
Auto-Cross Length – Use this slider to specify the duration of the fade during automatic
mixing. If this is set to 0 (left side), the tracks will play from start to finish.
Max Load – Specifies the duration maximum beyond which the track will not be loaded in
memory. Loading tracks which are too long in memory may put a strain on your system
performance and cause VirtualDJ to not function properly. This function makes it possible to
play long tracks without overloading the memory of your computer.
Scrolling – Allows reversing the direction of the scrolling rhythm window.
Disc – Allows selecting the spinning rate of the virtual turntables (default: 33 1/3 turns).
OPTIONS