Operation Manual

Even with the mix point markers available for on-the-fly adjusts, the mix points for a track can be set

prior to using that track as part of a automix playlist. The adjusted mix points are only utilized when

using the SMART automix type.

To edit a tracks Automix mix points, load a track to a deck, then select the respective BPM button for

that deck. In the ‗Edit BPM‘ dialog select the ‗Edit Automix‘ tab.

Then select which kind of mix point to edit (Mix Fade, Mix Cut,

Mix Tempo). Move the track to the position to use as the entry

point, and click on the button "Set Entry", then bring it to the

position of exit point, then click "Set Exit".

Repeat for Mix Cut and Mix Tempo if wanting to set those entry

points. To give VirtualDJ the option of using the Mix Cut and

Mix Tempo mix points place a check in the ‗Allow‘ box for each

mix type.

If the ‗Allow‘ for Mix Tempo is checked on both songs the Mix

Tempo points are used by the SMART automix when it

determines if the two songs can be beat mixed. A song with Mix

Tempo allowed has a asterisk (*) next to its BPM value in the

browser.

If the ‗Allow‘ for Mix Temp is not checked, the SMART automix

will then check if both ‗Allow‘ for Mix Cut are checked. If yes it

will do a cut mix (using the cut entry/exit points), otherwise the

SMART automix mode will do a standard fade using the Mix

Fade entry/exit points.

EDITING AUTOMIX MIX POINTS