Operation Manual

37
VirtualDJ is designed to be very simple and easy to use yet it is also fully customizable to match your
preferred system performance.
To make changes to VirtualDJ‘s configuration, click on the (CONFIG) button. This will bring you to the
―Settings‖ dialog. The options in the ―Settings‖ dialog can be viewed and edited by clicking on the
corresponding tab on top of the ―Settings‖ window and include:
For Home and Broadcaster platforms, see the Audio Setup guide for proper setup options.
Inputs If using timecode vinyl or CDs to control VirtualDJ, select the appropriate input configuration
from this pull-down list. Choices are ―NONE‖, ―Single Timecode‖ for Single control, and ―Timecodes‖ for
Dual Control, Line Ins for routing of external audio sources through VirtualDJ, and Microphone for
routing of a microphone through VirtualDJ. * Setting up VirtualDJ for Timecode use is covered in detail
in the Audio Setup Guide.*
Outputs Select the preferred output configuration from this pull-down list. Please note that,
depending on your sound card, some output options may not be available for use. Choices are Single
Output‖, ―Headphones‖, ―External Mixer‖ (2 channel output), or ―3-Lines Mixer‖ (3 channel output) and
Advanced Config.
Sound card(s) Select the sound card driver which you would like to use with the VirtualDJ software.
Sound card Select the sound card in this pull-down list.
ASIO Driver (not shown) If the Sound card selected type is ASIO, then this select the appropriately
installed ASIO driver for use. *See the Audio Setup Guide for more information.
Ultra-latency ASIO (not shown) There is two ASIO engines available for VirtualDJ to provide better
latency support. Checked is the original ASIO engine that is optimized for very low latency (renamed
ultra-latency) and is still considered the default engine. Some computers have problems with this
optimization. Unchecked is the NEW 'safer' performance level ASIO engine which has less optimization
for environments that have difficulty with the Ultra-Latency engine.
Output Channels Select the routing of outputs on soundcard when the Outputs drop-down is set to
one of the following choices - ―Headphones‖, ―External Mixer‖ (2 channel output), or ―3-Lines Mixer‖ (3
channel output).
* See the Audio Setup Guide for Basic, Headphone, Timecode, and Advanced Config setup
configurations *
SOUND SETUP
CONFIGURATION SETTINGS