Operation Manual

Mapper Options – to the right of the Connected Devices drop-down, click on the button for

accessing the various mapper options.

 Rescan for New Devices – when selected VirtualDJ scans for any devices connected

Toggle On/Off the use of these various type of devices.

Checked is On, Unchecked VirtualDJ will not use that

type of device(s).

 Use Keyboard Shortcuts

And with the VirtualDJ Pro platform:

 Use HID devices

 Use MIDI devices

 Use Firewire devices

 Use Serial Devices

 Show only connected devices – To see a list of all the mapped devices uncheck the

‗Show only connected devices‘ then click on the drop-down box arrow to see the list.

Reset Defaults, Delete an Assigned Key, or Add a New Key Entry

Below the list of assigned keys for the selected controller, are three buttons that provide

access to these functions. The first button will reset the selected

device to the original settings* when first installed. The second

‗Trash‘ button will remove a selected key entry from the list. The

last ‗Plus‘ button will add a new entry to the list for assigning a key and action.

* Note – the reset to original settings only applies to the natively installed devices.

Devices added using an independent definition and mapping file cannot be reset to their

original settings using this method. * To learn more about adding your own device

definition and mapping files please visit our wiki at http://www.virtualdj.com/wiki and

view the Controller Definitions section.

Key and Action assignments

The Mapper interface is designed to bring as much flexibility to the user in selecting and

assigning actions for customizing your externally connected devices.

For selecting the key to assign, you can manually select the defined key from a list then enter

the action in the action box. Or, use the VirtualDJ Key-Learn feature; so when you push or

move the key on your device it recognizes it automatically.

For assigning the actions (VDJScript), you can manually type the entries using the action list

and the action descriptions as a guide or the direct Action-Learn interface for selecting the

action from the skin.

All of these functions are performed from the right most area of the Mapper tab.

MAPPERS