Operation Manual

VirtualDJ 8 - User’s Guide
31
Master Volume
Adjust the Volume of the Master Output. Double-click to set the Master
Volume to maximum (100%). A VU meter is offered with the level of the
Master Output.
The LIM is an indicator that will show if the Limiter is engaged on the
Master Output. Limiter is ON by default and can not be disabled.
Use the REC button below the Master Volume to record the Master Output
to a Sample.
Headphones Volume/Mix
Use the VOL knob to adjust the volume of the Pre-listen
channel (headphones). Double-click to set the Headphones
Volume to maximum (100%)
Use the MIX knob to choose what will be heard in the Pre-listen Output (headphones. When
the knob is at 0% position, the selected (PFL) decks will be heard. When the knob is at
1000% position, the Master Output will be heard. In all other positions, the selected decks
(PFL) and the Master Output will be mixed in the Pre-listen Channel (headphones)
Note. The knobs will not be available if the Headphones are not selected in Audio Setup (Master
Only or External Mixer)
Microphone Volume / Mic ON
Use the MIC VOL knob to adjust the Volume of the Microphone Input.
Double-click to set the volume of the Microphone to maximum value
(100%). A VU meter is offered with the level of the Microphone Input.
Click on the ON button to enable/disable the Microphone.
Use the REC button to record only the Microphone Input to a Sample.
Note. The knob will not be available if Microphone is not present in the Audio Setup (or the
Microphone of your controlling device is a hardware one).