User Manual

Atomos Ninja V – User Manual Edition 1: November 2018 8
Turning ON power to the Ninja V
The start button is located on the top right hand side of the unit (as you
look at the screen). With a charged battery attached momentarily press
the recessed circular button on the top right side of the Ninja V as you
look at the screen to power up the unit. After a couple of seconds you will
see the Atomos logo, and then the Ninja V Home Screen.
Turning OFF power to the Ninja V
To turn the unit off, touch the battery icon on the top right of the home
screen, and then press the green Power icon for 4 seconds.
The icon will go red when touched to indicate activation of the button.
The unit will then power off. You can also do a forced power down by
pressing the on/off button for four seconds.
Four seconds can seem like a long time! We’ve made it this
way to make absolutely certain that the Ninja V can’t be turned
off accidentally.
Do not press and hold the power button in on the Ninja V while the unit
is off. This will place the device in to a Firmware recovery mode. If you
accidentally do this, simply turn the device off again or remove the
power source.
Take note to respect the air ow and do not to obstruct the cooling
vents of the unit.
Battery - Menu Screen
On
+ forced
power down
Tally Light
Flashes red when recording
Fan ventilation
Power down
Release
button
4. Powering the Ninja V