User guide

Atomos Connect. User Manual V1.0 10
Operation
Changing the TPG Video Mode
While the Connect is indicating the TPG
video mode (as above), the video output
mode can be changed by pressing the MODE
button a second time.
Each subsequent press of the MODE button
while in this state will cause the Connect to
scroll through video modes in the following
order.
TPG MODE P/I RATE SCAN
NTSC
720 59
1080i 59
p29
p59
p23
p24
PAL
720 50
1080i 50
p25
p50
NOTE: You must first enter the TPG Video
Indication mode in order to change the
current TPG video output format.
Changing the Test Pattern Output
While the Connect is indicating the TPG
video mode, the type of test pattern
output can be changed by pressing the
PWR/BAT button.
Each subsequent press of the PWR/BAT
button while in this state will cause the
Connect to scroll through the 4 test patterns
available in the following order:
1. SMPTE Colour Bars 75%
2. SDI EQ/PLL Pathological
3. Colour Bars 75%
4. Colour Bars 100%
NOTE: To change the test pattern in use, you
must first be in TPG Mode, have activated
the TPG Video Format Indicator and while in
this mode press the PWR/BAT button.
To return back to Converter Mode, press
and hold the MODE button for more
than 2 seconds.