User guide

Atomos Connect. User Manual V1.0 5
Power management
EXTERNAL & INTERNAL BATTERIES
The Connect converter has an internal
battery (240mAh) that will last up to 1 hour
in normal Converter mode. Also included,
and recommended for normal operation,
is an NP-570 (2600mAh) Sony-compatible
battery and an AC (110-240v) mains power
adaptor. The following describes the power
management indicators displayed on the
Connect while using the internal, external
and AC power supplies.
BASIC BATTERY INDICATOR
This indicates which power source is in use
(internal or external) and when power has
been reduced to critical levels. This is a basic
indicator that can be used to instantly check
which battery is in use and if a replacement
battery is required.
External battery or AC power indication
A BLUE LED indicates the use of an
external battery. This will flash BLUE when
the external battery is low.
NOTE: The internal battery will charge when
an external battery or AC mains adaptor is
attached to the Connect.
Internal battery level indication
GREEN indicates the internal battery is in use
This will go to solid RED when under 50%
power remaining.
When the internal battery is critically low, the
LED will show flashing RED.
EXTERNAL INTERNAL
EXTERNAL BATTERY
EXTERNAL BATTERY LOW
NOW USING INTERNAL BATTERY
INTERNAL BATTERY
INTERNAL BATTERY LOW <50%
CRITICAL > CHANGE BATTERY