Wireless SAPP Camera Installation and Operating Instructions Model: AWFB15 Version 1.2 PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE USING THIS PRODUCT AND KEEP THIS MANUAL FOR FUTURE REFERENCE.
CONTENTS INTRODUCTION............................................................................................... 1 Please Read Before You Start...................................................................................1 Wireless Devices Operating Range............................................................................1 Installation/Camera Setting Tips................................................................................2 Important Safety Precautions...........................
INTRODUCTION PLEASE READ BEFORE YOU START Always use discretion when installing CCTV equipment, especially when there is perceived policy. Enquire relevant local regulations applicable to the lawful installation of video recording/ surveillance. Third party consent may be required. WIRELESS DEVICES OPERATING RANGE I Ensure the signal reception viewed from the wireless camera(s) is the best reception between the camera(s) and the Wi-Fi router.
INSTALLATION/CAMERA SETTING TIPS For optimum detection, we suggest the camera is to be mounted 7 to 8 feet (2.1m to 2.4m) from the floor, and: • On a rigid vibration-free surface. • The expected movement of an intruder is across the fields of the detection pattern.
IMPORTANT SAFETY PRECAUTIONS Damages caused by non-compliance with this operating manual will void the warranty! We will not assume any liability for damages to items or persons caused by improper handling or noncompliance with the safety notices! Any warranty claim will be null and void in such cases. 1. Do not drop, puncture or disassemble the camera; otherwise the warranty will be voided. 2. Avoid all contact with water, and dry hands before using. 3. Never tug on the power cords.
FCC Compliance Statement: This Products with CE Marking comply device complies with Part 15 of the with EMC Directive (2004/108/ FCC rules. Operation is subjected to EC); Low Voltage Directive (73/23/ the following two conditions: (1) this EEC); R&TTE(1999/5/EC); ROHS device may not cause harmful interference, and (2) this Directive (2011/65/EU) issued by the Commission device must accept any interference received, including of the European Community.
KIT CONTENT Portable Event Camera Mini-USB Cable* x1 x1 CR123 Battery Quick Start Guide x4 x1 Tools Required: ‧Electric drill ‧5mm masonry drill bit ‧15mm masonry drill bit ‧No. 2 Philips screwdriver For best system performance: - iOS: iPhone5 / iPad2 / Mini iPad with iOS 7.0 or above. - Android: 1.5G dual core processor dual core procesor with 1G RAM or above. - Storage: Class 10 memory card. - Bandwidth: 1Mbps or above upload/download speed suggested. *The 5V/1.5A adaptor unit is not supplied.
CAMERA HARDWARE OVERVIEW White-Light LED Stand Mounting (Rear) HD Camera Battery Compartment (CR-123A x 4*) Status LED Light Sensor Memory Card Slot (Support up to 32GB) Motion Sensor Reset Key - Press and hold the reset button for 5 seconds, the camera will be restored to default setting. - The status LED will flash blue/red alternatively when reset success.
CAMERA INSTALLATION 1. Secure the camera stand on a stable surface $ 2. Loosen up the thumb screw 3. Adjust proper view angle, then secure the joint with T-bolt.
IMPORTANT Please Notice Below Before You Setup The SensorCam: - SensorCam offers public cloud storage function, to use this function please have Google Drive or Dropbox account information ready. Note: The cloud storage function is optional and may set up at a later time. Without the cloud storage, captured video files will store in the MicroSD card. - Please download and install the "Sensorcam" APP to your device.
App Download From your smart-device, go to App Store or Google Play to search and download "SensorCam". △ BEFORE LAUNCH the APP at the FIRST TIME ‧ MUST power on the camera before launching the APP at the first time. ‧ Power on the camera via batteries/power adapter. ‧ Launch the APP after status LED is flashing. ‧ Follow the steps in the App Wizard to complete the setup. ‧ It is possible to power the camera using both battery and external USB power at the same time.
1. Launch SensorCam app and tap 2. Tap Scan DID Label to scan for DID or manually type in the DID information. Camera DID: COXX-123456-ABCDE (example) Default Security Code: 123456 3. Name your camera (max. 20 characters). 4. Enter default Security Code: 123456. 5. Tap to save information and follow the in-app wizard to complete the setup process. 5.
MAIN PAGE OVERVIEW The MAIN PAGE section offers you an overview for all cameras registered and access to different management functions. Camera List - List of all registered cameras. You can quickly access preferred camera in the list even when multiple cameras are registered by scrolling the list up or down. - Tap the camera to enter Live-View. - The Connection Status (Connected or Disconnected) and Camera Mode (Battery or USB) are also indicated for each camera in the list.
ADD CAMERA Tap to add camera to app. Please refer to page-9 - "APP Setup" section for more details. SETTING Tap the and additional setup selection icons will appear. Tap to exit. Additional setup selection (iOS) (Android) CAMERA INFORMATION : Change camera name, reset Wi-Fi router setting and access camera's Advanced Setting section (see page-21). DELETE CAMERA : Remove the camera. EVENT LIST : View and playback the list of motion triggered event(s) for the particular camera(see page-17).
SETUP PIN LOCK MUST enter PIN code when you have enable PIN lock function with launching the APP. 1. Enable "Enable lock when starting" and enter your PIN code. 2. Confirm PIN code entered. (iOS) (Android) Note: If you forgot the PIN code, please delete and reinstall the app. NOTIFY (PUSH NOTIFICATION) The WAPP camera supports motion detection. When a motion is detected, you’ll receive push notification on the mobile devices for the event recognized by the camera.
For Android If you want to enable/disable it, please follow the steps below. Note: The internet connection and wireless network interference may influence the performance of push notification service. ABOUT APP/API Version Info (iOS) (Android) Tap the ABOUT icon to check the APP Version when necessary.
LIVE VIEW / SNAPSHOT / VIDEO RECORD Main page System Name & View Mode Connection Status Battery Video Resolution Camera Mode Video Record Return Snapshot Function Description System Name & View Mode Display the name of the camera assigned by user and current view mode (Live-View or Playback). Connection Status Indicating the connection status (Connected or Disconnected) between the app and the camera.
Live View The app allows you to access real-time streaming video (Live-View) from the main page, where you could select the camera preferred. In Live-View section you can take snapshots and record video by demand. For full screen display simply position the phone horizontally.
VIEW SNAPSHOTS For iOS Your snapshots will be named with the time stamp and saved into the Camera Roll location of your mobile device. For Android Your snapshots will be named with the time stamp and saved into the Photo Gallery > snapshot folder on your mobile device. EVENT VIDEO PLAYBACK The recorded video is automatically saved to the memory card. You can remotely access the file(s) for playback. Tap on the main page.
Tap and the Date-Time filter would appear. User may define the period for system to display all available recorded file(s) for playback. The app offers two different type of event list, (A) Local Memory Card Event List and (B) Cloud Storage Event List. Tap on the icon to view available event list. All available triggered events will be stored in the memory card. The number of available events will depend on the memory card storage capacity.
For playback, select the file from either local or cloud event section. During the playback you can tap the Pause icon to pause/resume the playback. The local network environment condition (example: upload/download speed) may cause improper video playback, such as black screen. When it happens please leave the playback mode and try again later when the internet condition improved. We strongly suggest that using Wi-Fi for better performance playback.
Note: allows user to conveniently retrieve important event files. It is best to download the event This function For iOS system, please use "Oplayer Lite" APP1Mbps for playback downloadedbandwidth video files(s). files using Wi-Fi network (WLAN), where minimum (upload/download) is available. You can Lite" frombandwidth App Store of charge). Download mayfind not "Oplayer be available if the do(free not meet the specified requirement.
ADVANCED SETTING This chapter explains the advanced settings for administrator. Administrator is the one who owns the administration password and has the full control to the WAPP camera. The administrator can access all WAPP functions and settings, while general users can receive the surveillance images for live view/screen capture/video recording and may not manage the camera settings. Admin Password The security code required to enter Advanced Setting for system setting management.
ADMIN PASSWORD This is the password for entering camera advanced setting section and by default the password is 123456. This password can have absolute control over the detail settings. It is required to enter this password everytime accessing the camera advanced setting. If you have multiple cameras register to the app, each camera can have its own admin password. iOS Android Note: If you forget the admin password, MUST reset the camera default security code (Please refer to page-6).
2. Type in the new password and confirm the new password again. 3. Tap OK to save the setting. Note: If you forget the admin password, MUST reset the camera default security code (Please refer to page6). After reset the camera setting, which will be erased and restored to factory default. You will need to reconfigure all settings. iOS Android CLOUD SETTING In this section you can create/setup/manage camera(s) cloud account and storage.
Edit Account Enter here to modify your cloud account password. Device Management Enter here to see all the cameras registered under the cloud account. You can unbondle the selected camera with existing Google Drive or DropBox and then bondle the camera to new Google Drive or DropBox. Yo u c a n a l s o r e m o v e t h e camera from the cloud account to stop using Google Drive or DropBox as cloud storage. The video files will be recorded to the memory card.
BRIGHTNESS To adjust the brightness level, with level 1 being the lowest and level 7 being highest. iOS WI-FI Here you can manage the setting of Wi-Fi network (available for Android version app). The app will automatically scan for available W-Fi router (SSID). Select the one you prefer to make the connection and enter router's password if necessary. Due to security concern, it is suggested to activate router's WPA/ WPA2/WPA2-PSK protocol. Please refer to router's manual for more details. Note: 1.
NOTIFY ENABLE By disable the notification alert here all user will not be able to receive push notification on their smart-device, even if they have push notification enabled. MOTION DETECT While the app is connected with the camera, you can disable/enable the motion detection function here. The camera will not take snapshots, record videos or send out push notifications if the motion detection function is disabled. You can also manually enable/disable the motion detection function via.
RECORD MODE You can take snapshots or video after detecting motion. iOS Android RECORD CYCLE TIME You can define the length of video record here. The longer length of video record will consume more battery power and take longer to upload to cloud, which also consume additional battery power.
VIDEO FRAMERATE You can define the frame rate of the video record here. The higher the frame rate will result in larger video file data, but better playback quality. VIDEO RESOLUTION iOS Android You can define the resolution quality of snapshots and video record in VGA (640*480) or HD (1280*720). The higher resolution will give you better viewing experience, at the same time it would require more storage space, longer upload time and more power consumption.
DEVICE INFORMATION This section contains information about the camera, such as firmware version, total and available space of the memory card inserted.
TROUBLE SHOOTING IF SOLUTION App cannot connect to the camera ‧Make sure the router is powered on. ‧Make sure the camera is powered on. ‧Make sure the router supports DHCP protocol. Wi-Fi router is not shown in the drop down list ‧ Make sure SSID broadcasting function is enabled in the WiFi router. Consult your Wi-Fi router manufacturer for the settings if necessary. ‧ Change the wireless security protocol of your Wi-Fi router into WPA/WPA2/WPA2-PSK.
Push notification is not functioning ‧ Make sure the push notification is enabled (including Admin setting). ‧ Make sure the motion detection function is enabled. ‧ Make sure the camera is powered on. ‧ Make sure the router is powered on. Bright white spot(s) appearing in the videos and/or snapshots ‧ Make sure the camera is not pointing directly at area/object that reflects light. ‧ Please refer to page-2, INSTALLATION/CAMERA SETTING TIPS for more detials.
PRODUCTION SPECIFICATION Networking Parameter Wireless Technology IEEE 802.11 b/g/n Network Connection Wi-Fi Network Protocols TCP/IP, UDP, SMTP, NTP, DHCP, ARP Simultaneous Viewers 3 concurrent sessions Security WEP/WPA/WPA2 (TKIP.
APPENDIX: COMPATIBLE LIST WiFi Compatible Router List Brand Product Name ASUS RT-N53 BUFFALO WIR-HP-C300NH2 BUFFALO WZR-HP-G450 Cisco ERT120 D-Link DIR-816L Huawei WSR20 INTELBRAS WRN300 NETGEAR Wndr3700v4 NETGEAR WGR614 Tenda FS395 TP-link TL-WR941N 33