User's Manual
BASIC CAMERA OPERATION
CAMERA INSTALLATION
CAMERA LIST LIVE VIDEO
Loosen up the thumb screw Adjust proper view angle, then secure the joint with T-bolt.
Secure the camera stand on a stable surface
Tighten the screw inside
the stand with screw
driver or coin to x the
T-bolt position if needed
1
2 3
90
For optimum detection, we suggest the camera is to be mounted 6.6 feet (2 meters) from the oor
, and:
• On a rigid vibration-free surface.
• So the expected movement of an intruder is across the elds of the detection pattern.
To avoid false alerts, please note this device is equipped with a PIR Motion Sensor that operates by
detecting temperature changes in the area in front of the device; Please avoid placing the device under
the following environments:
(1) Aiming the camera at windows or glass doors.
(2) Where small animals may enter the detection area.
(3) Where a heat source (sunlight, incandescent light, car headlights, etc) may aect the motion sensor.
(4) Where sudden temperature changes inside or around the detection area caused by hot or cold wind
(fans, air conditioners, etc.).
MOTION DETECTION / CAMERA SETTING TIPS
Follow the steps below for Event Playback.
$
Information
Refresh
Camera Setting
Add Additional Camera
From camera list section, tap the camera for live video.
(1) (1)-1
(2) (3) (4)
Download
Download
Download
Download
Download
Download
Download
Download
Download
Download
Download
1.
Tap and then the
2.
Select the time interval for the event list.
3.
Tap to select the le for playback.
4.
If you want to store the les in mobile device, tap to download the le (Best while under
Wi-Fi enviornment due to larger high denation data size).
Snapshot
Video Record
Turn On/O Mute
Return
Video Resolution