User's Manual
Products with CE Marking comply with EMC Directive
(2014/30/EU); Low Voltage Directive (2014/35/EU); RED
(2014/53/EU); ROHS Directive (2011/65/EU) issued by the
Commission of the European Community. Compliance
with these directives implies conformity to the following
European Norms:
EMC: EN 301 489
LVD: EN 60950
Radio: EN 300 328
If the camera system no longer functions or can no longer be repaired, it must be disposed of according to the valid statutory regulations.
Disposal of spent batteries/accumulators:
You are required by law (Battery Ordinance) to return all spent batteries and accumulators. Disposing of spent batteries/accumulators with
common household waste is prohibited! Batteries/accumulators that contain hazardous substances are marked with the symbols on the
side. These symbols indicate that it is prohibited to dispose of these batteries/accumulators in the household waste. The abbreviations for the
respective heavy metals are: Cd=cadmium, Hg=mercury, Pb=lead. You can return spent batteries and accumulators that can no longer be
charged to the designated collection points in your community, outlets or wherever batteries or accumulators are sold. Following these
instructions will allow you to fulll the legal requirements and contribute to the protection of our environment!
Please note this camera supports operation using both batteries (18650 rechargeable type) and external
DC power via 5V USB port; however, there are certain function limitation when device is using
batteries:
*Once the camera is in sleep mode; the user can no longer access it from mobile device.
The camera will become online when the motion detector has detected an event, or pressing the
power button of the camera.
Device will return to sleep mode after:
The camera cannot secure Wi-Fi connection with the router after trigger event. Depending on the sleep
timer setting (30s, 60s, 90s, 120s), the camera will enter and still attempt to establish connection with
router during the countdown. If the camera is able to establish connection, the camera will enter sleep
mode after data transfer (to cloud) completes.
How to Maximize Battery Power:
We suggest using the following setting to maximize battery power
• Install the camera where it can receive excellent Wi-Fi network signals (Weak Wi-Fi signal will force
camera to operate with higher Wi-Fi Power, which may consume more power).
• Set auto sleep timer to 30 seconds.
• Place the camera in a brighter lighting environment and turn off night vision.
• Do not stay in live view or system setting mode unless it’s necessary.
Top View Side View
Dectection Area 90°
R=5 Meters
2m
3m 4m 5m
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to
operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
This product is used and operated with a minimum distance of 20
cm between the radiator and user body.