User's Manual
Table Of Contents
- IMPORTANT NOTICE
- KIT CONTENT
- SAFETY AND INSTALLATION TIPS
- GETTING TO KNOW THE MONITOR AND CAMERA
- SYSTEM INTRODUCTION
- SYSTEM MENU
- SYSTEM OPERATION
- Camera Setup Screen
- Camera Pairing
- Camera Activation
- Brightness
- Recorder Setup Screen
- Motion Detection
- Email Alert
- Schedule Record
- Clear a Scheduled Recording
- Network Setup Screen
- Internet Setup
- Security Code
- Network Information
- Alarm Setup Screen
- Period
- Melody
- System Setup Screen
- Power Saving
- Screen Auto Lock
- Time
- Clock Alarm
- Time Setting
- Timer
- Format Storage
- System Upgrade
- Language
- Quick Tips
- REMOTE ACCESS
- MAINTAINING YOUR SYSTEM
- TROUBLE SHOOTING
- PRODUCT SPECIFICATION
10
Setting the Camera Channel (optional)
The wireless camera is supplied preset to channel 1.
The monitor supports up to 4 cameras. Follow the steps below in Camera Setup section to
setup or change the monitor channel of the camera. If you are adding another camera to
link with the supplied monitor in this kit, then ensure its channel is set to a different
channel to the existing camera(s).
Pairing the Camera to Receiver (optional)
Follow the steps in Camera Setup section to setup or change the channel of the camera. If
you are adding another camera to link with the supplied monitor in this kit, then ensure its
channel is set to a different channel to the existing camera(s).
Note:
If the camera is located within 1m to 1.5m from the monitor and the camera's volume on
the receiver is turned on, then you may hear a whistling noise on the monitor which is the
feedback picked up by the microphone. In this case please locate the camera further away
from the monitor to prevent this noise.
If the power connection to the camera is kept outdoors, ensure the connection is suitably
protected.