User's Manual
Table Of Contents
- IMPORTANT NOTICE
- KIT CONTENT
- SAFETY AND INSTALLATION TIPS
- GETTING TO KNOW THE MONITOR AND CAMERA
- SYSTEM INTRODUCTION
- SYSTEM MENU
- SYSTEM OPERATION
- Camera Setup Screen
- Camera Pairing
- Camera Activation
- Brightness
- Recorder Setup Screen
- Motion Detection
- Email Alert
- Schedule Record
- Clear a Scheduled Recording
- Network Setup Screen
- Internet Setup
- Security Code
- Network Information
- Alarm Setup Screen
- Period
- Melody
- System Setup Screen
- Power Saving
- Screen Auto Lock
- Time
- Clock Alarm
- Time Setting
- Timer
- Format Storage
- System Upgrade
- Language
- Quick Tips
- REMOTE ACCESS
- MAINTAINING YOUR SYSTEM
- TROUBLE SHOOTING
- PRODUCT SPECIFICATION
21
Recorder Setup Screen
Motion Detection
Tap the camera’s to set the sensitivity to Off, Low or High.
Default = low. The screen will return to the Motion Detection screen after 10 seconds or
when you press the Back icon.
Email Alert
The system can notify you when it detects motion from any camera by sending you an
email alert. The email alert contains information such as the time that motion was detected
and by which camera. In order to enable the Email Alert function, you must enter both
incoming and outgoing email addresses.
We strongly recommend you use Gmail to set up as the outgoing email server.
The outgoing email server (SMTP server) is responsible for sending out the email
notification to tell users when the system detects motion from any camera (Motion