User's Manual
Table Of Contents
- IMPORTANT NOTICE
- KIT CONTENT
- SAFETY AND INSTALLATION TIPS
- GETTING TO KNOW THE MONITOR AND CAMERA
- SYSTEM INTRODUCTION
- SYSTEM MENU
- SYSTEM OPERATION
- Camera Setup Screen
- Camera Pairing
- Camera Activation
- Brightness
- Recorder Setup Screen
- Motion Detection
- Email Alert
- Schedule Record
- Clear a Scheduled Recording
- Network Setup Screen
- Internet Setup
- Security Code
- Network Information
- Alarm Setup Screen
- Period
- Melody
- System Setup Screen
- Power Saving
- Screen Auto Lock
- Time
- Clock Alarm
- Time Setting
- Timer
- Format Storage
- System Upgrade
- Language
- Quick Tips
- REMOTE ACCESS
- MAINTAINING YOUR SYSTEM
- TROUBLE SHOOTING
- PRODUCT SPECIFICATION
26
2. If you have previously entered a code, the screen will display your current code
3. Tap on the change code field, a key board screen displays.
4. Enter your security code.
5. Tap OK. The system will return to Network Setup screen.
Note: Security code must be entered to gain remote access. To protect your privacy,
please be sure to change the default password 123456 into your personal security code.
Network Information
1. Tap the Network Information icon to display the Network Information screen.
2. Tap the BACK arrow to return to the previous screen.
Note:
The DID is a unique code specific to your monitor and is required to gain remote access
to your cameras over the internet.
The information in the DHCP setting is assigned to your monitor from your home router.