User's Manual
Table Of Contents
- IMPORTANT NOTICE
- KIT CONTENT
- SAFETY AND INSTALLATION TIPS
- GETTING TO KNOW THE MONITOR AND CAMERA
- SYSTEM INTRODUCTION
- SYSTEM MENU
- SYSTEM OPERATION
- Camera Setup Screen
- Camera Pairing
- Camera Activation
- Brightness
- Recorder Setup Screen
- Motion Detection
- Email Alert
- Schedule Record
- Clear a Scheduled Recording
- Network Setup Screen
- Internet Setup
- Security Code
- Network Information
- Alarm Setup Screen
- Period
- Melody
- System Setup Screen
- Power Saving
- Screen Auto Lock
- Time
- Clock Alarm
- Time Setting
- Timer
- Format Storage
- System Upgrade
- Language
- Quick Tips
- REMOTE ACCESS
- MAINTAINING YOUR SYSTEM
- TROUBLE SHOOTING
- PRODUCT SPECIFICATION
33
Language
English is the default language. If you change the language, all system settings default to
the original factory settings. You will have to reenter any specialized settings.
1. Select the language required. The Restore Default Settings screen displays.
2. Tap OK to continue. The system will shut down in about 5 seconds.
3. When the system restarts, it will ask you to perform the touch screen calibration.
Follow the instructions on the screen.
4. Select the frequency setting by tapping the frequency icon (50Hz /60Hz). Make sure
the frequency setting complies with local electrical regulations.
Note: In general the frequency for Europe is 220-240 volt, at 50 hertz frequency
Quick Tips
The Quick Tips screen provides additional details on important subjects of system
operation. Tap on a subject to display the information.