User's Manual

ABLEPick pick-to-light user manual

Step3: The confirmation button’s LED light will change color: RED, GREEN , BLUE

sequently.

Step4: Show the F/W version of the tag. For example: “U1.0”.

Step5: Show the address ID of the tag. For example: “[001]” (this is a decimal number).

Step6: Show the tag mode configuration of the tag. The default tag mode configuration

value is 115. in decimal.

Address configuration via the buttons directly.

The same as the other light model with three buttons

Self-test function enabled

The same as the other light model with three buttons

AT707-A-4K-RDIF hardware

Specification

1) Has two pairs of magnetic connectors to connect easily to main transmission bus with

stainless stuff. Two pairs of connectors are the redundancy design to enforce the

connection

2) 7-digits LED display. The first 4 digits are alphanumerical display, the left 3 digits are

7-segment display.

3) 2 up/down illuminated function buttons. Both Up and Down arrow buttons are WHITE

color.

4) One large illuminated confirmation button with 6-color LED.

5) 4 small illuminated button with different LED color by RED, GREEN, BLUE and

YELLOW from left to right. .

6) Each small illuminated button has 3 corresponding data buffer. 2 is for picking data,

another extra is called prompt buffer. It will be displayed automatically hereon the

picking data when it has been stored in.