User's Manual

ABLEPick pick-to-light user manual

AT707-A-4K-RF is an advanced picking device which can be able to implement less or no

zone boundary within order fulfillment operation for pick-by-light or put-by-light flow, called

zoneless picking light. AT707-A-4K-RF’s communication protocol is fully compatible with

Atop’s other cableless pick-to-light products.

AT707-A-4K-RF has 4 illuminated buttons with different LED color (RED, GREEN,

BLUE and YELLOW), each button could represent an picking order for pick-by-light

operation flow or a sorting product item for put-by-light operation flow. In other words,

with this design, AT707-A-4K-RF allows multiple orders for pick-by-light or multiple

items for put-by-lights be able to working concurrently within the same area.

Each button has 3 data buffers. 2 data with the arrows status is used for picking indication,

the third one is an extra prompt buffer. Once this prompt buffer has been stored message,

then this message will auto-show up for 2 seconds next to the previous picking data is

confirmed back.

Moreover, AT707-A-4K-RF’s another intelligent feature is the integrated design with RF

reader, all the data withdrawal from buffer and confirmation will be implemented by the

RF technology to control the accuracy, especially when implementing the multiple orders

or multiple items are working concurrently within the same area.

User can appoint one RF tag’s UID code (unique ID) to each button of AT707-A-4K-RF,

Then each button could have its corresponding picking data to have linkage with its

specific RF tag’s UID during picking operation. In other words, all the pre-sending picking

data need to recognize by its corresponding UID tag, then it can be able to trigger to work.