User's Manual
ABLEPick pick-to-light user manual
4
I/O port pin assignment
pin Defin.
1 RTS+
2 RTS-
3 DATA+
4 DATA-
5 GND
6 +12V /3A
7
8
Fan switch, 45 C auto power on
AT500’s IP configuration
AT500’s default IP address is “10.0.50.100” and sub-mask is “255.255.0.0”. You can use
ATOP’s tool “MONITOR.exe” to know and re-configure each AT500’s IP address.
Connection to TCP/IP controller (AT500)
Since AT500 has no DHCP function, so its host control PC/NB need to assign one IP
address which have to be within the same domain as the AT500. Then you can create one
TCP connection to connect it. AT500’s TCP port is 4660.