User's Manual

User manual Version 1.2

ABLELink

Ethernet-Serial Server

GW21W-MAXI

12 / 56

4. Software Configuration

4.1 Configuration set by monitor.exe utility

Use monitor.exe that comes with the product CD or diskette to configure the network parameters of

GW21W-MAXI. As you can see from the following picture, you can change IP address, gateway IP

address, subnet mask, user ID and password of GW21W-MAXI from the utility. For more details of the

utility please refer to Appendix-D Configuration Utility.

4.2 Configuration set by Telnet utility

You can use Telnet utility to change configuration settings of GW21W-MAXI. To do so, please do the

following.

■ Telnet to GW21W-MAXI using command “Telnet IP_address”.

For example Telnet 10.0.154.66

1. After Telnet to GW21W-MAXI, system prompts for a password, the default password is null.

Note: You can press the reset button of GW21W-MAXI to reset the password to the default value.

2. After verifying the password, the following terminal screen appears.