User's Manual

User manual Version 1.2

ABLELink

Ethernet-Serial Server

GW21W-MAXI

15 / 56

COM1 Setup

Select “4” from “Input choice and enter (0~5):” the following screen appears

The page gives you the opportunity to configure parameters of COM1 setting which include COM1

working mode, port parameters, enabling or disabling serial buffer’s data and setting packet delimiter.

LINK1 Setup

Type 1 from “Input choice and enter (1~4):” of COM1, the following screen appears. Configure

GW21W-MAXI as TCP server and the local port is 4660. IP filter is disabled by default, if IP filter is

enabled, only source IP 10.0.0.154 can connect to GW21W-MAXI.

Note: IP filtering function is disabled if setting FILTER_IP to “0.0.0.0”.

Configure GW21W-MAXI as TCP client, the destination IP is 10.0.29.123, destination port is 666.