User's Manual

User manual Version 1.0

ABLELink

Serial-Ethernet Server

GW51W-MAXI

51 / 54

Appendix D Configuration Utility

The configuration utility monitor.exe comes with the product CD or diskette is the main utility program to

demonstrate and configure GW51W-MAXI’s settings.

D.1 Run the utility

Start the program under Windows 95/98/NT/2000 environment and the following window appears.

D.2 Detect Operational Devices

You may do the following steps to detect devices currently available on the network.

1. Start monitor.exe utility program.

2. Select an item from the Broadcast IP list.

3. Specify a number in the Wishes box.

4. Click on the Invite button. This will display all the devices information you have requested.

D.3 Configure Devices

You may use monitor.exe configuration utility to configure the settings of devices on the network. To do

so, please follow the steps below.

1. Repeat the steps in the section of D.2 to bring up the devices information.

2. Select the device you want to configure from the IP Address column, click on the Config button, a

configuration window will popup as shown in Figure D2: