User's Manual

User manual Version 1.0
ABLELink Serial-Ethernet Server
GW51W-MAXI
Copyright © 2003 Atop Technologies, Inc.
All rights reserved. Designed in Taiwan.
53 / 54
The following table lists the functional descriptions for all the fields.
Field Name Field Descriptions
Broadcast IP Except for the defaul
t IP 255.255.255.255, other items (IPs) are read from the file
“seg.cfg”. This field specifies a detecting IP range. It may be a designated IP or a
broadcast IP.
Wishes
Specifies minimum number of the devices you wish to get reply from after sending an
Invite
request. If there is not as many as devices responding to your invitation, the
system repeatedly sends invitation until your request is fulfilled.
Reply
Indicates the actual number of devices this utility program detected.
Retry
Specify the number of times that an Invite request is re-sent.
Locate
Locate the specified device.
Reset
Reset the selected device.
Config
Configure the selected device.
Exit
Exit this utility.
IP Address
Indicate the IP address of the device that replied to your request.
Ÿ
Leading tag “!” stands for IP address collision, possibly caused by duplicated IP
addresses on the network.
Ÿ
Leading tag “?” stands for Mac address collision, possibly caused by duplicated
Mac addresses on the network.
MAC Address
Indicates the MAC address of responding device.
Gateway
Indicates the IP address of the gateway.
Subnet Mask
Indicates the TCP/IP network mask.
OS
Indicates the OS version of the responding device.
AP Version
Indicates the AP version of the responding device.
Model
Indicates the model number of the responding device. This field is only available for
monitor.exe version 2.0 and above.