User Manual
Table Of Contents
User manual Version 1.0
ABLELink
Wireless Serial Server
SW2001
Copyright © 2006 Atop Technologies, Inc.
All rights reserved. Designed in Taiwan.
32 / 51
Network setup
Click on the “Networking” link and the following screen appears. Fill in IP information under TCP/IP field.
Alternatively, you can do the configuration by putting a check on DHCP to obtain auto IP address,
gateway and subnet mask information.
Enable SNMP by checking “Enable”, fill in network identification information under SNMP field and click on
the “Save Configuration” button to save the changes, please notice that the setting will not become
effective until you restart SW2001.