User Manual
Table Of Contents
User manual Version 1.0
ABLELink
Wireless Serial Server
SW2001
Copyright © 2006 Atop Technologies, Inc.
All rights reserved. Designed in Taiwan.
39 / 51
Or you can enable Virtual COM through telnet configuration by setting COM1 as TCP server, and
type in the local port number for COM1, then enable virtual COM as shown in the following figure:
4.5.2.2 Run Serial/IP for ATOP program on monitoring PC
In the Window Start Menu, select the Serial/IP for ATOP program group and select Serial/IP for
ATOP Configuration. The configuration window is shown as following: