User Manual

Table Of Contents

User manual Version 1.0

ABLELink

Wireless Serial Server

SW2001

40 / 51

At right is a sample Virtual COM Control Panel window. At the left is the list of the COM ports that

you have selected (in the Select Ports window) for use by the Virtual COM Redirector. If you wish to

change which ports appear in this list, use the Select Ports button.

Each COM port has its own settings. When you click on a COM port, the Control Panel display

changes to reflect the settings for that COM port.

Note: When you change settings for a COM port, the changes are effective immediately. There is

no separate confirmation dialog to confirm or cancel your changes.

Configuring Virtual COM Ports

You configure each Serial/IP COM port as follows:

1. Select a COM port in the list.

2. For IP Address of Server, enter a numeric IP address for the serial server.

3. For Port Number, enter the TCP port number that the serial server uses to provide its

serial ports to the network.

4. For Server Credentials, the default is No Login Required. If your serial server does

require a login by the Virtual COM Redirector, the Virtual COM Redirector needs to provide