User Manual

User manual Version 1.0
ABLELink
Serial-Ethernet Server
SW5001
Copyright © 2006 Atop Technologies, Inc.
All rights reserved. Designed in Taiwan.
9 / 50
use Telnet to send the TCP/IP packet with destination port number 1 to SW5001, after SW5001 reboots it
will change its IP address to the new one.
Note:
1. Arp command can only be used to set a static IP address of SW5001 using system reset user name
admin and default password null.
2. Only TCP/IP packet with destination port number 1 will lead SW5001 to reboot and change the IP
address.
3.3 Auto IP
A DHCP server automatically assigns the IP address and network settings. SW5001 supports DHCP.
It will supply for the unit with an IP address gateway address, and subnet mask. You may use
Monitor.exe software to search network information automatically by putting a check on Auto IP on
Dialog window.