User Manual

User Manual Version 1.6
SE5001 Serial Device Server
Copyright © 2011 Atop Technologies, Inc.
All rights reserved. Designed in Taiwan.
21
3.2.7. Configure SE5001 as UDP
UDP is a connectionless protocol. It is faster than TCP, but does not guarantee packet delivery to the remote
host. Figure 3.12 shows how to setup UDP.
Figure 3.12 Link Mode: UDP Client Setup
 Type 3 in the “Input choice(1~5) and enter：“
 Input SE5001’s local listening port in the “Please input local port：”
 Input remote device’s IP in the “Please input Destination IP：”
 Input remote device’s listening port in the “Please input Destination port：”
3.2.8. Enable / Disable Virtual COM
Enable or disable Virtual COM on this page. For more information on how to setup Virtual COM on different
operating systems, please refer to chapter 4. Using Virtual COM.