User Manual

User Manual Version 1.6
SE5001 Serial Device Server
Copyright © 2011 Atop Technologies, Inc.
All rights reserved. Designed in Taiwan.
3
Contents
1. Introduction ................................................................................................... 6
1.1 SE5001 Series Comparison .......................................................................................... 6
1.2 Packaging ..................................................................................................................... 6
1.3 Application Connectivity ................................................................................................ 7
2. Hardware Installation ................................................................................ 10
2.1 Installation Procedure ...................................................................................................11
3. Software Setup ........................................................................................... 13
3.1 Configuration by SerialManager .................................................................................. 13
3.1.1. Static IP ..................................................................................................... 13
3.1.2. Auto IP (Dynamic IP) ................................................................................. 14
3.2 Configuration by Telnet Utility ...................................................................................... 15
3.2.1. Login to the System ................................................................................... 15
3.2.2. Networking ................................................................................................ 17
3.2.3. Change the Password ............................................................................... 18
3.2.4. COM1 Setup .............................................................................................. 18
3.2.5. Configure SE5001 as TCP server .............................................................. 19
3.2.6. Configure SE5001 as TCP Client ............................................................... 20
3.2.7. Configure SE5001 as UDP ........................................................................ 21
3.2.8. Enable / Disable Virtual COM .................................................................... 21
3.2.9. Enable / Disable Pair Connection .............................................................. 22
3.2.10. COM Port Setting ...................................................................................... 23
3.2.11. Emptying Serial Buffer when TCP connection is established ..................... 24
3.2.12. Setting Packet Delimiter ............................................................................ 25
3.2.13. Accept Control Command from COM port ................................................. 26
3.2.14. Backup EEPROM to Flash ......................................................................... 26
3.3 Configuration Using Web Browser ............................................................................... 27
3.3.1. Log in to the System .................................................................................. 27
3.3.2. Networking Setup ...................................................................................... 29
3.3.3. Security Setup ........................................................................................... 30
3.3.4. Backup EEPROM to Flash ......................................................................... 31
3.3.5. Link Mode Configuration ............................................................................ 31
3.3.6. Link Mode: Configure SE5001 as a TCP Server ........................................ 32